Re: Cannot access localhost under Windows XP Service Pack 2

From: Roberto Rocco (roberto.rocco_at_atoll.biz)
Date: 10/11/04

Next message: Burt: "Re: Why is Burt working on Sunday?"
Previous message: Roberto Rocco: "Re: Cannot access localhost under Windows XP Service Pack 2"
In reply to: Ken Schaefer: "Re: Cannot access localhost under Windows XP Service Pack 2"
Messages sorted by: [ date ] [ thread ]

Date: Mon, 11 Oct 2004 18:21:48 +0200

Hello Bernard, Hello Ken,

thank both of you for your replies!

Yes indeed, there were Event-log entries that are created every time I
attempt to access localhost (see below).
Additionally, I can open HTML pages using localhost (e.g.
http://localhost/MySite.html), but no asp-pages.
And since my localhost tries to open the default asp intro site it doesn't
work.

So it seems that localhost itself is working properly, but asp-pages do not.

The event-log entry I get is:
"Event-ID 7034: The COM+ System Application service terminated unexpectedly.
It has done this 3 time(s)."

When I read this I investigated a bit further and the only solution others
had for this kind of problem was to reinstall COM+ (!)

So I tried to reinstall COM+ via Add/Remove Windows Components by following
these steps:

1. renamed %windir%\system32\clbcatq.dll to %windir%\system32\~clbcatq.dll
2. restarted the computer
3. deleted the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\COM3 registry key
4. deleted the %windir%\Registration Folder
5. Tried to reinstall COM+ via Add/Remove Windows Components

During the reinstalltion of COM+ via Add/Remove Windows Components I got the
following error message:

"The sub-component has raised an exception during the
OC_COMPLETE_INFORMATION installation message" (translated from the original
german error message)
d:\nt\com\com1x\src\complussetup\comsetup\ccompluscore.cpp (Line 565)
Error-Code: 0x80040155

The funny thing is that now localhost is working again!!

What's left is a bad feeling about the mysterious error message during COM+
reinstallation.
I doubt you can help me with that, but just in case I've appended below the
dump of the comsetup.log

So finally my status is: System is working, but I don't know why ;)

Best regards,

Roberto Rocco.

Dump of comsetup.log:
================

COM+[11:3:32]:
********************************************************************************
COM+[11:3:32]: Setup started - [DATE:10,10,2004 TIME: 11:03 pm]
COM+[11:3:32]:
********************************************************************************
COM+[11:3:32]: Start OC_INIT_COMPONENT Component = com
COM+[11:3:32]: INF VERSION (com) = 2001,12,4414,42
COM+[11:3:32]: Instantiating CMasterNT5Wks
COM+[11:3:32]: Memory usage for setup process...
COM+[11:3:32]: PeakWorkingSetSize: 7348 Kb, WorkingSetSize: 7348 Kb
COM+[11:3:32]: QuotaPeakPagedPoolUsage: 42 Kb, QuotaPagedPoolUsage: 42 Kb
COM+[11:3:32]: PeakPagefileUsage: 3608 Kb, PagefileUsage: 3500 Kb
COM+[11:3:32]: MTSS: Answer File =
COM+[11:3:32]: Calling SetupOpenInfFile.
COM+[11:3:32]: Unable to open Answer File!!
COM+[11:3:32]: DRID-39104 -> Path: C:\WINDOWS\Java\Trustlib\
COM+[11:3:32]: Installed COM product version = 0.0.0.0
COM+[11:3:32]: SETUP VERSION = 3.0.0.4414
COM+[11:3:32]: Installation Mode = FRESH
COM+[11:3:32]: Setup Mode = CUSTOM
COM+[11:3:32]: DRID-39103 -> Path: C:\Programme\Gemeinsame
Dateien\ODBC\Data Sources\
COM+[11:3:32]: End OC_INIT_COMPONENT Return Value = 0
COM+[11:3:33]: Start OC_QUERY_STATEComponent = com Subcomponent = com
COM+[11:3:33]: Subcomponent com state: O-,C-,R-
COM+[11:3:33]: End OC_QUERY_STATE Return Value = 0
COM+[11:3:34]: Start OC_QUERY_CHANGE_SEL_STATE Component = com Subcomponent
= com
COM+[11:3:34]: Subcomponent com state: O-,C-,R-
COM+[11:3:34]: End OC_QUERY_CHANGE_SEL_STATE Return Value = 1
COM+[11:3:34]: Start OC_QUERY_CHANGE_SEL_STATE Component = com Subcomponent
= com
COM+[11:3:34]: Subcomponent com state: O-,C+,R-
COM+[11:3:34]: End OC_QUERY_CHANGE_SEL_STATE Return Value = 1
COM+[11:3:34]: Start OC_QUERY_CHANGE_SEL_STATE Component = com Subcomponent
= com
COM+[11:3:34]: Subcomponent com state: O-,C+,R-
COM+[11:3:34]: End OC_QUERY_CHANGE_SEL_STATE Return Value = 1
COM+[11:3:34]: Start OC_QUERY_CHANGE_SEL_STATE Component = com Subcomponent
= com
COM+[11:3:34]: Subcomponent com state: O-,C+,R-
COM+[11:3:34]: End OC_QUERY_CHANGE_SEL_STATE Return Value = 1
COM+[11:3:34]: Start OC_QUERY_CHANGE_SEL_STATE Component = com Subcomponent
= com
COM+[11:3:34]: Subcomponent com state: O-,C+,R-
COM+[11:3:34]: End OC_QUERY_CHANGE_SEL_STATE Return Value = 1
COM+[11:3:35]: Start OC_QUERY_CHANGE_SEL_STATE Component = com Subcomponent
= com
COM+[11:3:35]: Subcomponent com state: O-,C+,R-
COM+[11:3:35]: End OC_QUERY_CHANGE_SEL_STATE Return Value = 1
COM+[11:3:36]: Start OC_CALC_DISK_SPACE Component = com Subcomponent = com
COM+[11:3:36]: End OC_CALC_DISK_SPACE Return Value = 0
COM+[11:3:38]: Start OC_QUEUE_FILE_OPS Component = com Subcomponent =
COM+[11:3:38]: End OC_QUEUE_FILE_OPS Return Value = 0
COM+[11:3:38]: Start OC_QUEUE_FILE_OPS Component = com Subcomponent = com
COM+[11:3:38]: Subcomponent com state: O-,C+,R-
COM+[11:3:38]: Reading persistent registry values
COM+[11:3:38]: Finished reading persistent registry values, retval = 0x0
COM+[11:3:38]: Queuing file ops for component com, Section Name: com_install
COM+[11:3:38]: The following files will be copied:
COM+[11:3:38]: C:\WINDOWS\system32\clbcatq.dll
COM+[11:3:38]: C:\WINDOWS\system32\comsnap.dll
COM+[11:3:38]: C:\WINDOWS\system32\comuid.dll
COM+[11:3:38]: C:\WINDOWS\system32\comsvcs.dll
COM+[11:3:38]: C:\WINDOWS\system32\catsrv.dll
COM+[11:3:38]: C:\WINDOWS\system32\catsrvut.dll
COM+[11:3:38]: C:\WINDOWS\system32\clbcatex.dll
COM+[11:3:38]: C:\WINDOWS\system32\catsrvps.dll
COM+[11:3:38]: C:\WINDOWS\system32\stclient.dll
COM+[11:3:38]: C:\WINDOWS\system32\comrepl.dll
COM+[11:3:38]: C:\WINDOWS\system32\comaddin.dll
COM+[11:3:38]: C:\WINDOWS\system32\colbact.dll
COM+[11:3:38]: C:\WINDOWS\system32\Com\comadmin.dll
COM+[11:3:38]: C:\WINDOWS\system32\mtxdm.dll
COM+[11:3:38]: C:\WINDOWS\system32\mtxex.dll
COM+[11:3:38]: C:\WINDOWS\system32\mtxlegih.dll
COM+[11:3:38]: C:\WINDOWS\system32\dcomcnfg.exe
COM+[11:3:38]: C:\WINDOWS\system32\Com\comexp.msc
COM+[11:3:38]: C:\WINDOWS\system32\Com\comrepl.exe
COM+[11:3:38]: C:\WINDOWS\system32\Com\comempty.dat
COM+[11:3:38]: C:\WINDOWS\system32\Com\comrereg.exe
COM+[11:3:38]: C:\WINDOWS\system32\Com\migregdb.exe
COM+[11:3:38]: C:\WINDOWS\system32\Com\mtsadmin.tlb
COM+[11:3:38]: The following files will be deleted:
COM+[11:3:38]: Nuke registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\COM3\Setup.
COM+[11:3:38]: DRID-39105 -> Path: C:\Dokumente und Einstellungen\All
Users\Startmen―Programme\
COM+[11:3:38]: End OC_QUEUE_FILE_OPS Return Value = 0
COM+[11:3:39]: Start OC_QUERY_STEP_COUNT Component = com Subcomponent =
COM+[11:3:39]: End OC_QUERY_STEP_COUNT Return Value = 0
COM+[11:3:39]: Start OC_QUERY_STEP_COUNT Component = com Subcomponent = com
COM+[11:3:39]: End OC_QUERY_STEP_COUNT Return Value = 120
COM+[11:3:40]: Start OC_ABOUT_TO_COMMIT_QUEUE Component = com Subcomponent =
COM+[11:3:40]: No PendingFileRenameOperations
COM+[11:3:40]: End OC_ABOUT_TO_COMMIT_QUEUE Return Value = 0
COM+[11:3:41]: Start OC_ABOUT_TO_COMMIT_QUEUE Component = com Subcomponent =
com
COM+[11:3:41]: Subcomponent com state: O-,C+,R-
COM+[11:3:41]: Stopping service ComSysApp...
COM+[11:3:41]: Stopping service ComLB...
COM+[11:3:41]: Stopping service SENS...
COM+[11:3:41]: Stopping service EventSystem...
COM+[11:3:41]: Stopping service SENS...
COM+[11:3:41]: Stopping service fax...
COM+[11:3:41]: Stopping service w3svc...
COM+[11:3:41]: Stopping service smtpsvc...
COM+[11:3:41]: Stopping service iisadmin...
COM+[11:3:41]: Stopping service SMTPSVC...
COM+[11:3:41]: Stopping service W3SVC...
COM+[11:3:41]: End OC_ABOUT_TO_COMMIT_QUEUE Return Value = 0
COM+[11:3:42]: Start OC_COMPLETE_INSTALLATION Component = com Subcomponent =
COM+[11:3:43]: No PendingFileRenameOperations
COM+[11:3:43]: End OC_COMPLETE_INSTALLATION Return Value = 0
COM+[11:3:43]: Start OC_COMPLETE_INSTALLATION Component = com Subcomponent =
com
COM+[11:3:43]: Subcomponent com state: O-,C+,R+
COM+[11:3:43]: Queuing reg ops for component com, Section Name: com_install
COM+[11:3:43]: Registering TypeLib: C:\WINDOWS\system32\Com\mtsadmin.tlb
COM+[11:3:43]: SetFileAttributes returned 0x80070002 for menu item
C:\Dokumente und Einstellungen\All
Users\Startmen―Programme\Verwaltung\Explorer f〉 Komponentendienste.lnk
COM+[11:3:43]: Creating menu item for Komponentendienste.
COM+[11:3:43]: Nuke registry key:
HKEY_CLASSES_ROOT\AppID\{182C40F0-32E4-11D0-818B-00A0C9231C29}.
COM+[11:3:43]: Schema version is 83; schema is compatible
COM+[11:3:43]: Nuke registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\COM3\Setup.
COM+[11:3:43]: Registering C:\WINDOWS\system32\clbcatq.dll.
COM+[11:3:43]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\clbcatq.dll
COM+[11:3:43]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\clbcatq.dll
COM+[11:3:43]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\clbcatq.dll
COM+[11:3:43]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\clbcatq.dll
COM+[11:3:44]: Registering C:\WINDOWS\system32\comsnap.dll.
COM+[11:3:44]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\comsnap.dll
COM+[11:3:44]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\comsnap.dll
COM+[11:3:44]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\comsnap.dll
COM+[11:3:44]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\comsnap.dll
COM+[11:3:44]: Registering C:\WINDOWS\system32\comuid.dll.
COM+[11:3:44]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\comuid.dll
COM+[11:3:44]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\comuid.dll
COM+[11:3:44]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\comuid.dll
COM+[11:3:44]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\comuid.dll
COM+[11:3:45]: Registering C:\WINDOWS\system32\comsvcs.dll.
COM+[11:3:45]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\comsvcs.dll
COM+[11:3:45]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\comsvcs.dll
COM+[11:3:45]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\comsvcs.dll
COM+[11:3:45]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\comsvcs.dll
COM+[11:3:47]: Registering C:\WINDOWS\system32\catsrv.dll.
COM+[11:3:47]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\catsrv.dll
COM+[11:3:47]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\catsrv.dll
COM+[11:3:47]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\catsrv.dll
COM+[11:3:47]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\catsrv.dll
COM+[11:3:47]: Registering C:\WINDOWS\system32\catsrvut.dll.
COM+[11:3:47]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\catsrvut.dll
COM+[11:3:47]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\catsrvut.dll
COM+[11:3:47]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\catsrvut.dll
COM+[11:3:47]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\catsrvut.dll
COM+[11:3:48]: Registering C:\WINDOWS\system32\clbcatex.dll.
COM+[11:3:48]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\clbcatex.dll
COM+[11:3:48]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\clbcatex.dll
COM+[11:3:48]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\clbcatex.dll
COM+[11:3:48]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\clbcatex.dll
COM+[11:3:48]: Registering C:\WINDOWS\system32\catsrvps.dll.
COM+[11:3:48]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\catsrvps.dll
COM+[11:3:48]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\catsrvps.dll
COM+[11:3:48]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\catsrvps.dll
COM+[11:3:48]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\catsrvps.dll
COM+[11:3:49]: Registering C:\WINDOWS\system32\stclient.dll.
COM+[11:3:49]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\stclient.dll
COM+[11:3:49]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\stclient.dll
COM+[11:3:49]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\stclient.dll
COM+[11:3:49]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\stclient.dll
COM+[11:3:49]: Registering C:\WINDOWS\system32\comrepl.dll.
COM+[11:3:49]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\comrepl.dll
COM+[11:3:49]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\comrepl.dll
COM+[11:3:49]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\comrepl.dll
COM+[11:3:49]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\comrepl.dll
COM+[11:3:49]: Registering C:\WINDOWS\system32\comaddin.dll.
COM+[11:3:49]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\comaddin.dll
COM+[11:3:49]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\comaddin.dll
COM+[11:3:49]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\comaddin.dll
COM+[11:3:49]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\comaddin.dll
COM+[11:3:49]: Registering C:\WINDOWS\system32\colbact.dll.
COM+[11:3:49]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\colbact.dll
COM+[11:3:49]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\colbact.dll
COM+[11:3:49]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\colbact.dll
COM+[11:3:49]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\colbact.dll
COM+[11:3:49]: Registering C:\WINDOWS\system32\Com\comadmin.dll.
COM+[11:3:49]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\Com\comadmin.dll
COM+[11:3:49]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\Com\comadmin.dll
COM+[11:3:49]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\Com\comadmin.dll
COM+[11:3:49]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\Com\comadmin.dll
COM+[11:3:50]: Registering C:\WINDOWS\system32\es.dll.
COM+[11:3:50]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\es.dll
COM+[11:3:50]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\es.dll
COM+[11:3:50]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\es.dll
COM+[11:3:50]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\es.dll
COM+[11:3:50]: Registering C:\WINDOWS\system32\txflog.dll.
COM+[11:3:50]: Before call to LoadLibrary - Module:
C:\WINDOWS\system32\txflog.dll
COM+[11:3:50]: After call to LoadLibrary - Module:
C:\WINDOWS\system32\txflog.dll
COM+[11:3:50]: Before call to DllRegisterServer - Module:
C:\WINDOWS\system32\txflog.dll
COM+[11:3:50]: After call to DllRegisterServer - Module:
C:\WINDOWS\system32\txflog.dll
COM+[11:3:51]: Before RegisterComEventClasses
COM+[11:3:51]: ERROR: Throwing Exception - FILE:
d:\nt\com\com1x\src\complussetup\comsetup\ccompluscore.cpp, LINE: 565
Die COM+-Ereignisklassen konnten nicht registriert werden.
Error Code = 0x80040155(-2147221163)
COM+[11:3:51]: RaiseException: Error Code: 0x80040155
COM+[11:3:52]: Warning: error 0x8007054b in IsWin2001PrimaryDomainController
COM+[11:3:52]: Machine is not a PDC
COM+[11:3:52]: ProcessDSSchema succeeded: 0x0
COM+[11:3:52]: COM+ Successfully Deactivated
COM+[11:3:52]: Memory usage for setup process...
COM+[11:3:52]: PeakWorkingSetSize: 49580 Kb, WorkingSetSize: 49360 Kb
COM+[11:3:52]: QuotaPeakPagedPoolUsage: 96 Kb, QuotaPagedPoolUsage: 90 Kb
COM+[11:3:52]: PeakPagefileUsage: 21080 Kb, PagefileUsage: 21000 Kb
COM+[11:3:52]: Die Unterkomponente COM+ hat beim Verarbeiten der
OC_COMPLETE_INSTALLATION-Installationsnachricht eine Ausnahme ausgel"st.

d:\nt\com\com1x\src\complussetup\comsetup\ccompluscore.cpp (Zeile 565)

Fehlercode = 0x80040155

Schnittstelle nicht registriert

Die COM+-Ereignisklassen konnten nicht registriert werden.
COM+[11:4:0]: End OC_COMPLETE_INSTALLATION Return Value = -2147221163
COM+[11:4:0]: Start OC_QUERY_STATEComponent = com Subcomponent = com
COM+[11:4:0]: Subcomponent com state: O-,C+,R+
COM+[11:4:0]: End OC_QUERY_STATE Return Value = 2
COM+[11:4:5]: Start OC_CLEANUP Component = com
COM+[11:4:5]: Stopping service COM+ System Application...
COM+[11:4:5]: Memory usage for setup process...
COM+[11:4:5]: PeakWorkingSetSize: 51608 Kb, WorkingSetSize: 37652 Kb
COM+[11:4:5]: QuotaPeakPagedPoolUsage: 96 Kb, QuotaPagedPoolUsage: 76 Kb
COM+[11:4:5]: PeakPagefileUsage: 23960 Kb, PagefileUsage: 20992 Kb
COM+[11:4:5]: End OC_CLEANUP Return Value = 0
COM+[11:4:6]:
********************************************************************************
COM+[11:4:6]: Setup finished - [DATE:10,10,2004 TIME: 11:04 pm]
COM+[11:4:6]:
********************************************************************************

"Ken Schaefer" <kenREMOVE@THISadOpenStatic.com> wrote in message
news:%23uAfr1yrEHA.2724@TK2MSFTNGP14.phx.gbl...
> Are there any other entries in the Event Log that might be relevant? Any
> other errors or warnings? Please post the Event ID, source and description
> fields.
>
> IIS on Windows XP (and Windows 2000) uses COM+, and if COM+ is tanking,
> then IIS is not going to be able to do everything it's supposed to.
>
> Cheers
> Ken
>
>
> "Roberto Rocco" <roberto@rocco.de> wrote in message
> news:ODQvsSsrEHA.332@TK2MSFTNGP14.phx.gbl...
>> Hello Bernard,
>>
>> thank you for your reply. I made a little progress, but still having
>> problems:
>> Here's my status:
>>
>> I opened the IIS MMC under Web Site Properties/Home Directory Tab and
>> checked the
>> Application Protection level. It was set to "middle". I set it to low
>> and with this setting I can access simple html with localhost.
>>
>> BUT: I still cannot enter http://localhost.
>>
>> Following your suggestion I looked at the event log and indeed there's an
>> error entry saying:
>> "Event-ID 7034: The COM+ System Application service terminated
>> unexpectedly. It has done this 3 time(s)."
>>
>> I believe it must have something to do with not being able to open ASP
>> pages, since I also get the following error message whenever I try to
>> create a new ASP project in Visual Studio 2003:
>>
>> "Visual Studio cannot create or open the application because the Web
>> server
>> on this computer is not running. Start the Web server before proceeding."
>>
>> So is the COM+ System Application Servive the reason? Or is the event log
>> entry misleading here?
>>
>> Thank you for every hint,
>>
>> Roberto Rocco.
>>
>>
>>
>>
>>
>> "Bernard" <qbernard@hotmail.com.discuss> schrieb im Newsbeitrag
>> news:u$OySinrEHA.736@tk2msftngp13.phx.gbl...
>>> Anything in event log ?
>>> have you try a simple html ? http://localhost/simple.html ?
>>> does it works ?
>>>
>>> --
>>> Regards,
>>> Bernard Cheah
>>> http://www.tryiis.com/
>>> http://support.microsoft.com/
>>> http://www.msmvps.com/bernard/
>>>
>>>
>>>
>>> "Roberto Rocco" <roberto@rocco.de> wrote in message
>>> news:O8F87ikrEHA.2128@TK2MSFTNGP10.phx.gbl...
>>>> Hello,
>>>>
>>>> since my installation of Windows XP Service Pack 2 I cannot access
>>>> http://localhost.
>>>>
>>>> I get a HTTP 500 error (Server Application Error: The server has
>>> encountered
>>>> an error while loading an application during the processing of your
>>> request.
>>>> Please refer to the event log for more detail information. Please
>>>> contact
>>>> the server administrator for assistance)
>>>>
>>>> However, I can successfully ping to http://localhost.
>>>>
>>>> IIS and WWW-Publishing Service are both up and running!
>>>>
>>>> I also deactivated the Windows Firewall and rebooted the system, but
>>>> still
>>>> cannot access localhost.
>>>>
>>>> Also: When I try to create a new ASP Web project in Visual Studio 2003
>>> get
>>>> the error message: "Visual Studio cannot create or open the application
>>>> because the Web server on this computer is not running. Start the Web
>>> server
>>>> before proceeding."
>>>>
>>>> I guess this is also due to the localhost not working.
>>>>
>>>> Has anybody an idea of what I could do to make localhost work with SP2?
>>>>
>>>> Many thanks in advance,
>>>>
>>>> Roberto Rocco.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Next message: Burt: "Re: Why is Burt working on Sunday?"
Previous message: Roberto Rocco: "Re: Cannot access localhost under Windows XP Service Pack 2"
In reply to: Ken Schaefer: "Re: Cannot access localhost under Windows XP Service Pack 2"
Messages sorted by: [ date ] [ thread ]

Relevant Pages

Re: Cannot access localhost under Windows XP Service Pack 2
... there were Event-log entries that are created every time I ... I can open HTML pages using localhost (e.g. ... So I tried to reinstall COM+ via Add/Remove Windows Components by following ... following error message: ...
(microsoft.public.inetserver.iis)
Re: Cannot access localhost under Windows XP Service Pack 2
... I can open HTML pages using localhost (e.g. ... So I tried to reinstall COM+ via Add/Remove Windows Components by following ... following error message: ...
(microsoft.public.windowsxp.network_web)
Re: iis and vb.net
... Please post the *exact* error message you are receiving, ... configuration changes you made to IIS. ... it basically says that 'localhost' ...
(microsoft.public.inetserver.iis.security)
Re: X11 Forwarding
... > So what does it mean that DISPLAY is the same whether or not I connect ... I would have expected DISPLAY=hostname:xx.x not localhost. ... Maybe running xclock without the & so you can see the error message ... supprise us by showing error messages from the logs, debug ...
(comp.security.ssh)