Re: How to setup a mail server (POP3 and SMTP) with a dynamic IP
- From: "Ron Hinds" <__ron__dontspamme@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 1 Jun 2007 12:32:07 -0700
What kind of firewall/router are you using? I'm using a LinkSys - you have
to enable port forwarding for ports 25 and 110 to IP address 192.168.1.2 -
also, that IP address must be a static, not dynamic, IP on the WS 2003
machine.
"Tony Carfield" <TonyCarfield@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:EE5B1963-C8B7-4A81-9F82-C1011B8D2BB0@xxxxxxxxxxxxxxxx
Hi,about
After I had setup a mail server with a dynamic IP on my computer installed
Windows Server 2003 R2, Enterprise Edition, I could send and receive email
with this email account, 'ssltony@xxxxxxxxxx' through it only in Intranet.
However, I tried to send email with this email account,
'ssltony@xxxxxxxxxxxxxxxxx' (Dynamic DNS) but I could not receive it. For
your understanding and studying my problem, I listed more information
my hardware and software configuration below:DNS
-My server is connected to Internet through my router with DDNS support
-The IP address of Domain Name is updated by a company named Dynamic
-The Domain name is myname.dyndns.orgclient
-IP address of router: 192.168.1.1
-Only one network adapter is installed on my server
-Its properties are listed below:
-IP address : 192.168.1.2
-Subnet mask: 255.255.255.0
-Default Gateway: 192.168.1.1
-Preferred DNS Server: 127.0.0.1
-Alternate DNS Server: 192.168.1.1
-POP3 Service:
-Authentication Method: Active Directory Integrated
-Server Port: 110
-Logging Level: Minimun
-Root Mail Directory: C:\inetpub\mailroot\mailbox
-Checked this 'Require Secure Password Authentication (SPA) for all
connections' optionthe
-Checked this 'Always create an assoicated user for new mailboxes' option
-Domain: tony.local
-Mailbox Name: ssltony
-Default SMTP Virtual Sever in my computer, PC1WinSvr2K3R:
-Properities"
-General:
-IP Address: 192.168.1.2
-Access:
-Authentication:
-Checked this 'Anonymous access' option
-Connection control:
-Checked this 'All except the list below' option (Nothing is in
list)
-Relay restrictions:
-Checked this 'All except this list below' option
(Nothing is in the list)
-Checked this 'Allow all computers which successfully authenticate to
relay, regradless of this list above' option -Messages:(Default)
-Delivery:
-Outbound Security:
-Checked this 'Anonymous access' option
-Oubound Connections:(Default)
-Advanced Delivery:
-Maximum hop count: 15
-Masquerade domain: empty
-Fully-qualified domain name:mail.tony.local
-Smart host:empty
-LDAP Routing:(Default,Disable)
-Security:(Default) -Domains:
-pc1winsvr2k3r2.tony.local, Local(Default)
-8c4f5174-4984-4f8a-91d7.., Local(Normal) -tony.local , Local(Custom)
DNS Server:
-Adding a Host (A) record:
-mail,Host(A),192.168,1,2
-Adding a Mail Exchanger(MX) record:
-(same as parent folder),Mail Exchanger(MX),[10] mail.tony.local.
Ms Outlook Express:
-Generail:
-Mail Account: mail.tony.local
-User Information:
-E-mail address: ssltony@xxxxxxxxxx
-Checked this 'include this account when receving mail or synchronizing'
option
-Server:
-My incoming mail server is a [POP3] server
-Incoming mail (POP3): mail.tony.local
-Outgoing mail (SMTP): mail.tony.local
-Incoming Mail Server:
-Account Name: ssltony
-Password:*******
-Checked the 'Log on using Secure Password Authentication' option
-Connections:(Default)
-Security:(Default)
-Advanced:(Default)
If you have any suggestion, please give me response.
Tony Carfield
.
- Follow-Ups:
- Re: How to setup a mail server (POP3 and SMTP) with a dynamic IP
- From: Tony Carfield
- Re: How to setup a mail server (POP3 and SMTP) with a dynamic IP
- Prev by Date: Slow RCPT
- Next by Date: Re: How to setup a mail server (POP3 and SMTP) with a dynamic IP
- Previous by thread: Slow RCPT
- Next by thread: Re: How to setup a mail server (POP3 and SMTP) with a dynamic IP
- Index(es):
Relevant Pages
|
