Re: site stopped working

so FTP is working then?
can you open up the firewall or disable it first to see if this is ISA
problem?

if yes, then check the publishing rules again.

--
Regards,
Bernard Cheah
http://www.iis.net/
http://msmvps.com/blogs/bernard/


"bbxrider" <support@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:OoSB8UmfIHA.4728@xxxxxxxxxxxxxxxxxxxxxxx
yes ftp.exe works on the sbs machine only, it does not work on the pc's
on the local lan

"Bernard Cheah [MVP]" <qbernard@xxxxxxxxxxxxxxxxxxx> wrote in message
news:eXvEDRcfIHA.6092@xxxxxxxxxxxxxxxxxxxxxxx
So ftp.exe locally works ? or ?

--
Regards,
Bernard Cheah
http://www.iis.net/
http://msmvps.com/blogs/bernard/


"bbxrider" <bxtrap01@xxxxxxxxxxxx> wrote in message
news:e2jydl8eIHA.4476@xxxxxxxxxxxxxxxxxxxxxxx
i will have to look at the isa, its another thing that has been below my
radar
i didn't set up the server initially, but i have provisioned all the
ports on the router,
however since it worked once, i'm thinking that the isa setup was ok
then, and i certainly
haven't made any changes to it. the server automatically gets it updates
from ms, so maybe one
of those made some changes that affect the ftp
since the last time ftp worked, i have installed php and mysql, which i
have on the default port 3306,
i have had problems, posted before here, but never resolved with the
site timing out, when transferring
multiple folder layers using the explorer option under tools. timed out
no matter how long i set the timeout
limit.

"Bernard Cheah [MVP]" <qbernard@xxxxxxxxxxxxxxxxxxx> wrote in message
news:%23xX0dPoeIHA.1208@xxxxxxxxxxxxxxxxxxxxxxx
Ya. it looks like only the first part that it get through, then
something in between drop it.
if you ftp locally at the server works?
do you have a publishing rules in ISA (SBS) that allow ftp traffic?

and do you know what changed recently ? as it was working before.


--
Regards,
Bernard Cheah
http://www.iis.net/
http://msmvps.com/blogs/bernard/


"bbxrider" <bxtrap01@xxxxxxxxxxxx> wrote in message
news:uc1gpZmeIHA.4140@xxxxxxxxxxxxxxxxxxxxxxx
i ran portqryv2, -local, it did not indicate anything other than ftp
was listening on 21
when i connect with ie, it just hangs, if i connect with command line
ftp, i get a 220 ms ftp service reply, and then it hangs for about
1 minute, never get a prompt for username, them disconnects,
'connection closed by remote host'
i ran portqryv2 remote and got
TCP port 21 (ftp service): LISTENING
but same thing as command line, it just dropped it
so it seems like i am getting thru the router (and sbs internal
firewall?)
so if i am getting thru, any thing else to check?
thanks
bob
"Bernard Cheah [MVP]" <qbernard@xxxxxxxxxxxxxxxxxxx> wrote in message
news:etyL3$beIHA.288@xxxxxxxxxxxxxxxxxxxxxxx
1) The binding error, could be due to port conflict, make sure no
other program is binidng on the site ip/port.

2) Temporary disable the firewall.... if still the same maybe at
router level blocking? this should be networking related as it works
locally.

--
Regards,
Bernard Cheah
http://www.iis.net/
http://msmvps.com/blogs/bernard/


"bbxrider" <support@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:upGSOoaeIHA.4140@xxxxxxxxxxxxxxxxxxxxxxx
for sbs2003/iis 6.0
had a virtual ftp site working with required user logon, anonymous
not allowd.then something happened somewhere somehow, and can not
connect to site. no errors in the ftp log but the could not bind
instance 115 error showed up in the system log, so i stopd and
restarted site, there's no more could not bind 115 errors, in the
sys log but still can't access the site.
my firewall still has the same port 21 firewall config as before. i
can access the ftp site on the sbs machine only, can't access on my
lan or external thru the web.
any suggestions?
bob















.

Relevant Pages

  • Re: Hacked? External address knocks on internal private address...
    ... The important part of your message is that FTP is allowed out... ... You open a connection to an FTP Server and logon. ... When you ask the server for a file the server issues a "PORT" command ... so it can open a port on the firewall to allow the incoming Data ...
    (comp.security.firewalls)
  • RE: FTP Window of opportunity?
    ... does it seemingly accept the connections and drop them once the response ... Subject: FTP Window of opportunity? ... blocked by the firewall. ... the FTP port shows up. ...
    (Pen-Test)
  • RE: FTP Window of opportunity?
    ... target on the line when in reality it was just a firewall lying to them. ... The connection connects and then immediately ... Subject: FTP Window of opportunity? ... the FTP port shows up. ...
    (Pen-Test)
  • Re: Is this a 3-Leg Perimeter scenario?
    ... the same configuration as I had it originally before upgrading to ISA 2004 ... No PersisentRoute enrty on the clients; no firewall client disabling; no IE ... using IE to access the FTP. ...
    (microsoft.public.windows.server.sbs)
  • Re: FTP error using a MAC
    ... Yes, you are using active mode, but the firewall/NAT can't take care of it ... behind a firewall, you then told me to change to active mode? ... In active mode the FTP client connects from a random unprivileged port N ...
    (microsoft.public.inetserver.iis.ftp)
Loading