Re: Windows 2003 SP2 and FTP

²»Ó÷ÅÆú¡£

I just tested with SP2, and I'm can't repro what you claim.
I have firewall on + inetinfo.exe defined in the exception list,
and I'm able to connect from another Vista client machine via command line
tool - ftp.exe

--
Regards,
Bernard Cheah
http://www.iis.net/
http://www.iis-resources.com/
http://msmvps.com/blogs/bernard/


"Gary" <Gary@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FB8F89C7-881E-4844-B577-0F9B273DE83D@xxxxxxxxxxxxxxxx
Yes, this it is.

If you turn Windows Firewall off on the server, everything works fine.
maybe
that is the only way. Shall I give up? ����

Gary



"Bernard Cheah [MVP]" wrote:

Does this happen locally ?

let me get sp2 into my test box and test.

--
Regards,
Bernard Cheah
http://www.iis.net/
http://www.iis-resources.com/
http://msmvps.com/blogs/bernard/


"Gary" <Gary@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:48D5A423-C5D8-46FB-947D-CB586C4F9A64@xxxxxxxxxxxxxxxx
Here it is:

============
C:\Documents and Settings\Gary Xu>ftp
ftp> open 172.16.1.3
Connected to 172.16.1.3.
220 Microsoft FTP Service
User (172.16.1.3:(none)): hssdomain\xug
Connection closed by remote host.
ftp>
============
And I do have inetinfo.exe in the exception list of Windows Firewall of
the
FTP server.

Gary

"Bernard Cheah [MVP]" wrote:

Can you post the complete ftp.exe output?

if you have set exception for inetinfo.exe... ftp will works.

--
Regards,
Bernard Cheah
http://www.iis.net/
http://www.iis-resources.com/
http://msmvps.com/blogs/bernard/


"Gary" <Gary@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B4BD8FDB-0658-4125-BC4C-85AC3913C81D@xxxxxxxxxxxxxxxx
I tried ftp.exe, here is what I did;
1. From DOS screen, enter ftp.exe
2. ftp>open 172.16.1.3, got the prompt for user ID and password and
I
put
them in
3. got the message: "Connection closed by remote host".

I use WS_FTP client, there is a check box "Passive mode", check that
box
or
uncheck that box, it just doesn't work. After port 21 connected, it
try
to
randomly open higher ports for data transmission, which blocked by
Windows
Firewall.

Gary

"Bernard Cheah [MVP]" wrote:

Zzz the same old question again :)
Can you test ftp.exe from remotely? this should works as you have
the
inetinfo.exe exception defined.

what client you using? does it work in active mode?


--
Regards,
Bernard Cheah
http://www.iis.net/
http://www.iis-resources.com/
http://msmvps.com/blogs/bernard/


"Gary" <Gary@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3602DA3E-2F63-4950-9264-0EF2B2D50A9A@xxxxxxxxxxxxxxxx
Thanks fot the reply. I did everything you mentioned here, I even
added
one
to allow TCP port 20 as well. Added inetinfo.exe as exception.
Tried
ftp.exe
from command line, and got the error message "Connection closed
by
remote
host". When I looked at the remote FTP server "Client Session",
it
shows
that
port 21 connected, but on my side the FTP failed to connect.

If I take Windows Firewall off on the W2K3 server, everything
works
fine.
I
think there is no way to make the FTP to work if I have Windows
Firewall
activated.

Gary

"Bernard Cheah [MVP]" wrote:

I have R2 without sp2. did you allow ftp services on the
firewall ?
Windows Firewall - advanced - network connection - select your
connect,
click settings, check ftp services....

or have you create an exception for inetinfo.exe ?

can you test it out with ftp.exe first?


--
Regards,
Bernard Cheah
http://www.iis.net/
http://www.iis-resources.com/
http://msmvps.com/blogs/bernard/


"Gary" <Gary@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:CBA63621-6FE8-4F61-AFB4-4C5061256600@xxxxxxxxxxxxxxxx
Hi:

I installed a Windows W2K3 R2 64bit server and enabled FTP
server
for
internal use. After I installed SP2 on W2K3 server, I cannot
connect
FTP
anymore. But if I turn Windows Firewall off on that server,
FTP
works
fine.
How can I turn Firewall on and make FTP to work. I am using
WS_FTP.
Thanks.














.

Relevant Pages

  • Re: Bug with W2K3, SP1, Windows Firewall and FTP
    ... add a welcome message to the ftp. ... Bernard Cheah ... list and exception is allowed (of coz tight to the scope of your ... I decided to try adding a port 21 in the firewall exception list ...
    (microsoft.public.inetserver.iis.ftp)
  • RE: FTP Window of opportunity?
    ... target on the line when in reality it was just a firewall lying to them. ... The connection connects and then immediately ... Subject: FTP Window of opportunity? ... the FTP port shows up. ...
    (Pen-Test)
  • Re: Bug with W2K3, SP1, Windows Firewall and FTP
    ... Port) in the Exceptions tab and uncheck the pre-defined FTP Server in the ... list and exception is allowed (of coz tight to the scope of your exception ... I decided to try adding a port 21 in the firewall exception list just to ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: Bug with W2K3, SP1, Windows Firewall and FTP
    ... it is IE and the "Enable folder view for FTP ... Bernard Cheah ... I decided to try adding a port 21 in the firewall exception list just ... the Advanced section for the Local Area Connection, ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: Bug with W2K3, SP1, Windows Firewall and FTP
    ... Bernard Cheah ... FTP service is listed, it should be bi-directional. ... I'm confuse as well:) between the advanced tab and exception tab. ... I decided to try adding a port 21 in the firewall exception list ...
    (microsoft.public.inetserver.iis.ftp)
Loading