Re: Extremely abnormal behaviour: ftp client does show a file list in a folder occasionally

You see - you are one of few poster which stuck in this problem, few I saw
in the past has able to make this work by:
a) configure exception for inetinfo.exe
b) after configuring passiveportrange, configure the firewall to allow
inbound for those port range. new firewall ruleset

with the above two. ftp should work remotely via active/passive mode

I would first test it locally, then machine on the same lan
then remotely from external where it has to go through your router/firewall
etc


--
Regards,
Bernard Cheah
http://www.iis.net/
http://www.iis-resources.com/
http://msmvps.com/blogs/bernard/


"kevin" <ocean_chen@xxxxxxxxxxx> wrote in message
news:1173337431.881064.81340@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2). Yes, from the first log, the port 5014 was in the PassivePortRange
"5004-5700", but it was still not working.
(it was hanging there after the same amount of 2920 bytes had been
transferred from that "tmp1" directory.)

3). Yeah, I will try to restart the server after the new
PassivePortRange setup, but I do not expect after this things will be
OK, as I already restarted the server in the above 2).

After disabling the firewall, everything goes indeed well and openly.

Is there a way for me to know those ports blocked, for the server
locally? In fact, we did not change the server default settings very
much, and they could be from the larger company network.

Thanks.





.

Relevant Pages

  • Re: ISA NLB Drain/Stop
    ... some internal users lose access to websites until they restart their browser. ... Since our clients are Firewall Clients first and foremost, the firewall sessions will be tied to a particular server. ...
    (microsoft.public.isa.configuration)
  • Re: NTP
    ... > John Smith wrote: ... This command tests if the server is reachable and if it will ... Another quick test would be deactivate the firewall temporarily ... and then restart the ntpd daemon ...
    (alt.os.linux.suse)
  • Re: Firewall - system-config-securitylevel
    ... I only have access via ssh to this server. ... "service iptables restart". ... Everything in telnet is in cleartext (usernames, passwords, the ... need to restart the firewall somehow? ...
    (Fedora)
  • Re: [SLE] SLP9 - DNS on FW with MASQ
    ... > I'm fairly new to SuSE 9.0 and am running a small network with firewall on ... > I have implemented masquerading and the Squid proxy server with no problem. ... > get it to run ON the firewall. ... After a restart, it works fine. ...
    (SuSE)
  • Re: CEICW fails at firewall config
    ... Do you or do you not have ISA 2000 or ISA 2004 installed on the SBS server? ... Do you have 2 NICs in the SBS? ... CEICW fails on firewall configuration every time. ... >>> Call to Creating the protected networks access rule returned ok. ...
    (microsoft.public.windows.server.sbs)
Loading