Re: FTP WON'T START

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

firewall? what error msgs you got when you try to start it?
anything in event log? probably best to post it at .windows networking
group.

--
Regards,
Bernard Cheah
http://www.iis-resources.com/
http://www.iiswebcastseries.com/
http://msmvps.com/blogs/bernard/


"gabrielle" <gabrielle@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:62A31E36-2A96-4A48-A676-5E0419B85800@xxxxxxxxxxxxxxxx
It actually took a reboot. This is going to have about 250 sites on it.
Do
you know anything about why the firewall won't start? I turned off the
service Routeing and Remote Access and I still can't get into the
firewall.
I plan on putting a Cisco Pix infront of this server. I am sure it won't
matter but it is just bothersome that I can't get it to work.

Thank you for your help
--
Gabrielle J. Giroux
Senior Network Engineer


"Bernard Cheah [MVP]" wrote:

Ok, start with basic first.

if you getting
5- FTP says "This site cannot be started because another site is running
on
this computer is already using the IP address and TCP port values that
you
have specified for this site. Please change either the IP Address or the
TCP
port values for this site."

how many ftp sites you running? if you have more than 1 make sure
ip/port
are unique.
also check if you have other program binding on port 21.
command prompt, entere
c:\> nestat -ano

do you see any port 21 binding?


--
Regards,
Bernard Cheah
http://www.iis-resources.com/
http://www.iiswebcastseries.com/
http://msmvps.com/blogs/bernard/


"gabrielle" <gabrielle@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2355DB43-5087-463A-BB12-18BA1567C935@xxxxxxxxxxxxxxxx
I guess I should tell you that this same IP and website works fine on my
other 2003 Server. I am not using Active Directory on the other one
that
is
why I don't want to put this site there. I am in testing mode.
However,
I
can't even get this to start without isolation

Thanks again
--
Gabrielle J. Giroux
Senior Network Engineer


"gabrielle" wrote:

Have 2003 v2 Server- Domain name is myco.local.

1- Setup 1 website on the server ie. 10.0.0.200 port 80
2- active directory user is there
3- Website is viewable
4- Setup FTP IP - Same 10.0.0.200- Port 21 - Stopped
5- FTP says "This site cannot be started because another site is
running
on
this computer is already using the IP address and TCP port values that
you
have specified for this site. Please change either the IP Address or
the
TCP
port values for this site."
6- Even if I am not ISOLATING USERS just setting up a basic FTP i get
the
same error. I want is ISOLATE.

Could this still have something to do with RRAS??
I just had an Issue with RRAS beinging on but since I stopped the
service
the website is viewable.

1st - can anyone help me with this

2nd - does anyone have documentation on setting up from the
beginning -
everything that it takes to ISOLATE USERS with Active directory?

THANK YOU SO MUCH
--
Gabrielle J. Giroux
Senior Network Engineer





.

Relevant Pages

  • Re: keeping ports open
    ... If a port is open, it means that 1) a software or service is running on your ... and 2) you're not using a firewall or your firewall isn't ... Use firewall software and hardware and antivirus software that is ... Follow the instructions for hardening Windows and IIS at ...
    (microsoft.public.security)
  • Re: How to Maintain an IIS Server?
    ... > server running on a Windows 2000 server. ... before a firewall and antivirus have been installed]. ... open ports; however, this will not identify which program is using the port. ...
    (microsoft.public.inetserver.iis.security)
  • Re: CEICW fails at firewall config
    ... ISA Server prevents connection to a remote desktop when you connect through ... Remote Web Workplace on a Windows Small Business Server 2003-based computer ... Acceleration Server as a firewall. ... connection uses TCP port 4125. ...
    (microsoft.public.windows.server.sbs)
  • Re: How to Maintain an IIS Server?
    ... >> server running on a Windows 2000 server. ... > before a firewall and antivirus have been installed]. ... > program or executable using that port. ...
    (microsoft.public.inetserver.iis.security)
  • Re: Is secedit.exe left by a hacker?
    ... > tested on port 445. ... > I have a Linksys router that I use as a firewall to my ... Secedit.exe is the name of a legitimate Windows file, ... investigate the files on your computer - antivirus with the latest updates ...
    (microsoft.public.win2000.security)