Re: FTP WON'T START

It actually took a reboot. This is going to have about 250 sites on it. Do
you know anything about why the firewall won't start? I turned off the
service Routeing and Remote Access and I still can't get into the firewall.
I plan on putting a Cisco Pix infront of this server. I am sure it won't
matter but it is just bothersome that I can't get it to work.

Thank you for your help
--
Gabrielle J. Giroux
Senior Network Engineer


"Bernard Cheah [MVP]" wrote:

Ok, start with basic first.

if you getting
5- FTP says "This site cannot be started because another site is running on
this computer is already using the IP address and TCP port values that you
have specified for this site. Please change either the IP Address or the
TCP
port values for this site."

how many ftp sites you running? if you have more than 1 make sure ip/port
are unique.
also check if you have other program binding on port 21.
command prompt, entere
c:\> nestat -ano

do you see any port 21 binding?


--
Regards,
Bernard Cheah
http://www.iis-resources.com/
http://www.iiswebcastseries.com/
http://msmvps.com/blogs/bernard/


"gabrielle" <gabrielle@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2355DB43-5087-463A-BB12-18BA1567C935@xxxxxxxxxxxxxxxx
I guess I should tell you that this same IP and website works fine on my
other 2003 Server. I am not using Active Directory on the other one that
is
why I don't want to put this site there. I am in testing mode. However,
I
can't even get this to start without isolation

Thanks again
--
Gabrielle J. Giroux
Senior Network Engineer


"gabrielle" wrote:

Have 2003 v2 Server- Domain name is myco.local.

1- Setup 1 website on the server ie. 10.0.0.200 port 80
2- active directory user is there
3- Website is viewable
4- Setup FTP IP - Same 10.0.0.200- Port 21 - Stopped
5- FTP says "This site cannot be started because another site is running
on
this computer is already using the IP address and TCP port values that
you
have specified for this site. Please change either the IP Address or the
TCP
port values for this site."
6- Even if I am not ISOLATING USERS just setting up a basic FTP i get the
same error. I want is ISOLATE.

Could this still have something to do with RRAS??
I just had an Issue with RRAS beinging on but since I stopped the service
the website is viewable.

1st - can anyone help me with this

2nd - does anyone have documentation on setting up from the beginning -
everything that it takes to ISOLATE USERS with Active directory?

THANK YOU SO MUCH
--
Gabrielle J. Giroux
Senior Network Engineer



.

Relevant Pages

  • Re: FTP WONT START
    ... 5- FTP says "This site cannot be started because another site is running on ... this computer is already using the IP address and TCP port values that you ... 6- Even if I am not ISOLATING USERS just setting up a basic FTP i get the ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: PORTS necessary for surfing?
    ... You need to port map connections from the outside made to your Internet ... TCP port 21 to your FTP server's address. ... connections to TCP port 21 on any interface. ...
    (comp.security.firewalls)
  • Re: A poor mans activity check :)
    ... > In PORT mode, an FTP server connects from its TCP port 20 to the port ... > specified in the PORT command from the FTP client. ... > to the client's TCP port 20. ...
    (comp.security.firewalls)
  • RE: Telnet/ftp problems SBS2000
    ... Please make sure your client computers are configured as both Firewall ... will find two options "Enable folder view for FTP sites" and "Use Passive ... that the control connection has been successfully established, ... (other than port 21) ...
    (microsoft.public.windows.server.sbs)
  • FTP transfer port
    ... FTP transfer port ... the FTP server "listens" for client connections on its port 21. ... it will establish a separate control connection and data connection with ...
    (bit.listserv.ibm-main)