Re: Error 426 when connecting to virtual directory

From: Mike R. (MikeR_at_discussions.microsoft.com)
Date: 10/11/04 

Date: Mon, 11 Oct 2004 07:13:04 -0700

Bernard,

Thanks for your reply.
Now I can't even connect to my server!!!
Here is the new error message:

C:\ftp domain.com
Connected to domain.com.
Connection closed by remote host.

I have no clue what's going on.
Port 20 and 21 are open.

Thanks,

Mike

"Bernard" wrote:

> Sounds like passive mode issue again.
> if you try command prompt ftp.exe from remote host,
> can you login ? and do dir listing ?
>
> For passive mode to work, you need to open certain port range.
> read -
> Information About the IIS File Transmission Protocol (FTP) Service
> http://support.microsoft.com/?id=283679
> How To Configure PassivePortRange In IIS
> http://support.microsoft.com/?id=555022
>
> --
> Regards,
> Bernard Cheah
> http://www.tryiis.com/
> http://support.microsoft.com/
> http://www.msmvps.com/bernard/
>
>
>
> "Mike R." <MikeR@discussions.microsoft.com> wrote in message
> news:464DDBA6-D555-4074-9A60-8A88D0A7B2C7@microsoft.com...
> > I am running SBS 2003 without ISA. I have a linksys router to direct
> incoming
> > traffics to my server. (Note: I have two NICs on this server: Local NIC
> and
> > External NIC).
> >
> > On my Firewall I have forwarded ports 20 and 21 to my server's External
> NIC.
> > I also enabled FTP from SBS firewall.
> >
> > I also created a ftp users group and added this group to "Domain
> Controller
> > Security Policy" under "Allow Log on Locally" and made my FTP user to be
> part
> > of this group.
> >
> > Now when I use a FTP client I am getting this error:
> > 426 Connection closed; transfer aborted.
> >
> > Am I missing something here?
> >
> > Can someone please guide me as far as how to confgure my ftp users with
> IIS
> > 6 on SBS 2003 server and an external firewall?
> >
> > Thanks alot,
> >
> > Mike
> >
> >
>
>
>

Relevant Pages

  • Re: Cannot connect to FTP server
    ... the other way to configure passive mode is to customize the passiveport ... How To Configure PassivePortRange In IIS ... Information About the IIS File Transmission Protocol (FTP) Service ... Select the 'enable folder view for ftp site'. ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: FTP connection resetting
    ... For passive mode, the changes I know is the passive port range... ... Bernard Cheah ... 200 MB) on our IIS 6.0 FTP server. ... We use Filezilla as FTP client in passive mode. ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: IIS 6.0 FTP
    ... The IIS is running, along with the FTP ... There is no other FTP service on this server. ... I understand your have the order entry program, ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: IIS 6.0 FTP
    ... Well IIS FTP does have such a feature, how to use it, I do not know. ... clients are using an order entry program created in Microsoft access. ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: IIS 6.0 FTP
    ... Internet Information Services (IIS) Manager ... The Security System detected an authentication error for the server ... I doubt IIS FTP has such feature. ... using the clients username and password, ...
    (microsoft.public.inetserver.iis.ftp)
Quantcast