Re: 3 Leg configuration issue.

I cannot understand your description of the situation.

--
Phillip Windell
www.wandtv.com

The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------
"Trevor Langston" <trevor.langston@xxxxxxxxxxxxxxxxxxx> wrote in message
news:%234$bdzJ8HHA.2752@xxxxxxxxxxxxxxxxxxxxxxx
One of the requirements is to isolate this network segment behind the ISA
2006 array. Because it will have public access from the internet with the
ability to create accounts in this protected isolated MOSS domain and not
on the production domain. I am not opposed to a front back solution in
fact we are going back to that now. Where I am stuck is trying to allow
sourced addressed (10.x.x.x Internal production devices) hitting the
external interface (Nic#1) through to the protected Vlan (192.168.6.x
network). Monitoring shows the request hitting the interface and denying
the connection. When I add the Perimeter Network I lose the ability to
route back. I would assume because it is trying to route what it considers
a protected network segment. I get a Destination Host Unreachable.


.

Relevant Pages

  • Re: Approaches of interprocess communication
    ... | Inter-process TCP/IP communication between two processes on the same | host invariably uses the loopback interface (network 127.0.0.0). ... | The transmit driver for the loopback interface receives a datagram from | the local network layer and immediately announces its reception back to ... However on Solaris I have observed local connections to an external interface actually increasing the packet count on the loopback, but I can't confirm whether those connections were to services specifically bound only to the external interface. ... Certainly on Windows XP there is a host-specific route via 127.0.0.1 to the external interfaces as well as the network route via the external interface. ...
    (comp.lang.python)
  • Re: Bridging network adapters in Linux
    ... ip addr add $address/$netbits dev br0 ... Either a default route ... two network devices assuming, ... This is done using the iptables mechanism. ...
    (comp.os.linux.networking)
  • RE: ISA 2004 help please
    ... network, and I have set that as the gateway on those machines. ... When I set a persistant route on ... the server to their addresses (how I configured the ISA 2000 serverand they ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • [IPv6] PROBLEM? Network unreachable despite correct route
    ... I have several boxes with native IPv6 connectivity at various places. ... Some of them show symptoms of a lost default route for small periods of ... self built AMD Athlon64, Ubuntu Edgy, Distribution kernel ... At the same time, a sibling (same hardware, same switch, same network ...
    (Linux-Kernel)
  • Re: load balancing with a failover
    ... The tunnel interfaces have addresses ... from other network though ... Enter configuration commands, one per line. ... 1w0d: RT: delete subnet route to 192.168.128.20/30 ...
    (comp.dcom.sys.cisco)
Loading