I have had no success publishing a broadcast rule

Tech-Archive recommends: Fix windows errors by optimizing your registry

I need a rule to allow a UDP (port 11000) traffic from the ISA 2006 server (192.168.0.1) to the broadcast address on the same subnet (192.168.0.255).

My internal network is defined as 192.168.0.0 - 192.168.0.255.

Everthing I have tried gets denied by ISA and the rule is <blank>.
I can send to .1 - .254 fine, but not .255.

Any ideas?

.

Relevant Pages

  • Re: RRAS ip routing and ISA
    ... I have an dual homed ISA 2006 enterprise server acting as an edge ... I would like to join another internal subnet, ... stand-alone server as a DHCP server as long as it is not on a subnet ...
    (microsoft.public.windows.server.networking)
  • Re: RRAS ip routing and ISA
    ... I have an dual homed ISA 2006 enterprise server acting as an edge firewall ... I would like to join another internal subnet, ... When a stand-alone DHCP server detects an ...
    (microsoft.public.windows.server.networking)
  • Re: TCP/IP Urgent help
    ... >> coneect to them in the same subnet. ... >> subnet and connect between them using router, or there is no any Problems ... >> because of Broadcast, if so, and if i made each company to work with its ... > You would set up a server in the head office running DNS (and possibly WINS ...
    (microsoft.public.windowsxp.network_web)
  • Re: isa on a single subnet
    ... a DHCP server is used so I can just change the subnet to say ... I was hoping it would be possible to split the 192.168.0.0 subnet into ... I think that was the way they taught it, but I don't know if ISA ... then out to the internet. ...
    (microsoft.public.isa)
  • Re: Subnet cannot share internet connection...help
    ... The one has the ISA Server, DNS + DHCP server on Subnet ... or other "router in the middle". ...
    (microsoft.public.windows.server.general)