Re: New ISA Server Installation

anonymous_at_discussions.microsoft.com
Date: 09/16/04

  • Next message: Rising: "Re: New ISA Server Installation" 
    Date: Thu, 16 Sep 2004 01:08:12 -0700

    Thanks a lot for your help !!. I really appreciate it.
    thanks again.

    >-----Original Message-----
    >Take a look at www.isaserver.org and there you will find
    a tutorial that
    >explains everything you want, how to configure the nic`s,
    how to give acess.
    >Install isa server at integrated mode, not firewall mode,
    because you will
    >have more opitions to use.
    >
    >
    >"Steve Bruce" <steve@xmaslake.com> escreveu na mensagem
    >news:%23wLtc9blEHA.596@TK2MSFTNGP11.phx.gbl...
    >> You questions would take to long for anyone to answer
    completely so here
    >> is
    >> a start.
    >>
    >> Yes you need 2 NICS, that is the only way ISA works (2
    or more).
    >>
    >> The rest of your goals are achievable and the How TO
    can be found in ISA
    >> Help - Check the Scenarios in Help and on the Microsoft
    Site.
    >>
    >> "Rising" <anonymous@discussions.microsoft.com> wrote in
    message
    >> news:7fd701c495a5$ab7c77a0$a601280a@phx.gbl...
    >>> I need to install a new ISA Server 2000 on a Windows
    2000
    >>> server which is also a Domain controller.
    >>>
    >>> I would like to know the following:
    >>>
    >>> 1. Do I require 2 network cards or one network card is
    >>> enough. If one is required then how will the clients be
    >>> configured and how can I test the client connectivity
    >>> after I install it? If I use 2 network cards, then can
    I
    >>> use one network card for incoming requests and the
    other
    >>> network card for outgoing requests and if yes, then how
    >>> can this be done?
    >>>
    >>> 2. I would like to install the ISA Server in firewall
    >>> mode. So, by default all access will be disabled. How
    can
    >>> I quickly enable access to all sites and then disable
    >>> sites one by one later on? What to do for the initial
    >>> configuration which is "free for all"?
    >>>
    >>> 3. To block specific web sites, which rules have to be
    >>> configured and how?
    >>>
    >>> 4. if I want to monitor the traffic passing through the
    >>> ISA Server , then what needs to be configured and how
    it
    >>> can be done?Can I see the traffic graphically to
    determine
    >>> the load or the number of users connected to it at any
    >>> point of time?
    >>>
    >>> 5. If I Integrate ISA Server with Active directory,
    then
    >>> can I restrict network users web access by their user
    name
    >>> and if yes, how?
    >>>
    >>>
    >>> Any help, comments, documentation, web links etc will
    be
    >>> highly appreciated.
    >>>
    >>> Thanks in Advance. I will really appreciate your help.
    >>>
    >>
    >>
    >
    >
    >.
    >

  • Next message: Rising: "Re: New ISA Server Installation"