ISA Server 2000 not redirecting to Exchange 2000 OWA

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Terry Kell (terry_at_terrykell.co.uk)
Date: 09/08/04 

Date: 8 Sep 2004 06:33:21 -0700

I hope someone can help me with this as I am going insane.

I'm currently setting up an ISA 2000 server running on Windows Server
2003 to act as an OWA front end. It is sitting on the internal LAN for
testing at the moment but will be moved to a DMZ when working.

I've applied SP2 and FP1.

I've followed every guide to the letter using FQDN's everywhere and
double checked every setting against the same setup I have at another
client, finding no differences. It works fine there.

>From my ISA server I can open http://exchangeserver/exchange to access
my OWA fine.

Whenever I go to http://isaserver/exchange I get 404 page not found
error. Both servers have 1 nic and reside on the same 192.168.x.x
subnet using the same dns servers with ip forwarders setup ok.

I just want to prove that the redirection works before I move it to a
dmz and setup SSL but am going insane trying to figure this out.

I have also completely removed ISA and started again with the same
results.

Any help would be greatly appreciated

Terry

Relevant Pages

  • PIX501 ISA SBS2003 Network Setup Thoughts
    ... This was the setup I was handed. ... ports pointing to 3 windows 2000 server boxes and 1 pointing to the SBS ... install ISA set it as the default gateway and leave it be, however, by ...
    (microsoft.public.windows.server.sbs)
  • Re: Static Routes in VPN
    ... I wouldn't install ISA on the 2nd office and simply do the ... same setup as the other post. ... What is the purpose of the remote server? ... > able to take there laptops to the second site and connect ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: HTTP trouble in 2004
    ... > understand is why can't I ping the public address of the DC. ... >> separating the DC role from the ISA Server role. ... >>>I appear to be an ISA dummy and have a small problem. ... My nics are setup with teh DC being the DNS server and my IE ...
    (microsoft.public.isaserver)
  • Re: Help with SBS2003 New installation and networking
    ... My modem does not have a setup option to allow forwarding of ip addresses. ... And I haven't been able to get ISA setup properly. ... internal private IP in Small Business Server 2003? ...
    (microsoft.public.windows.server.sbs)
  • RE: Sercond ISA on SBS Member Server
    ... ISA on a SBS member server. ... Without a good backup, it's difficult to have the server ... - This is often used for ISA server configuration recovery. ...
    (microsoft.public.windows.server.sbs)