Re: Firewall client doesnt intercept pings on ISA2004

From: Thomas W Shinder [MVP] (tshinder_at_hotmail.com)
Date: 08/11/04 

Date: Wed, 11 Aug 2004 17:08:10 -0500

Hi Ivan,

You need to configure the host as SecureNAT to support ICMP.

HTH, 

--
Tom
www.isaserver.org/shinder
Get the book!
Tom and Deb Shinder's Configuring ISA Server 2004
http://tinyurl.com/3xqb7
MVP -- ISA Firewalls
"Ivan Mckenzie" <imck@inerza.com> wrote in message
news:uwJUDc9fEHA.3024@TK2MSFTNGP10.phx.gbl...
: Hi every one, I have a rule that permits pings from the internal network
to
: the perimiter and external network. In the internal network I have
computer
: A configured with firewall client and no default gateway.
:
: If I ping from the internal computer A to a computer on the external
network
: I get the message "destination host unreacheble", but if I give computer A
: the default gateway the IP of the internal nic of ISA server then I do get
: response.
:
: As I can see the firewall client does not intercept the ping. I thought
that
: all traffic goes through Firewall client if it is enabled on the client
: computer.
:
: Is this normal?
:
: Thanks a lot to every one.
:
:

Relevant Pages

  • Re: Juniper Ssl Vpn
    ... By adding the customers internal ip address to address's in the internal network on isa, the issue corrected which I expected - is that the best way to handle this? ... I have no issue with making it work when the firewall client is disabled; entered exceptions in the "directly access these servers or domains" on the Isa server in the Internal Properties-Web Browser tab. ...
    (microsoft.public.isa)
  • More.....
    ... I have enable firewall client on the internal network BUT .... ... the isa server ... i just create a rule that allow all port from this ...
    (microsoft.public.isaserver)
  • Re: guest account
    ... Make them install the firewall client, and then give them 80 access ... put a wireless access point outside the ISA server and let them connect ... laptops connecting to our internal network from time to time. ...
    (microsoft.public.windows.server.sbs)
  • Re: Static NAT on ISA 2000
    ... Tom and Deb Shinder's Configuring ISA Server 2004 ... from the internal network to the external network without ...
    (microsoft.public.isaserver)
  • Re: REPOST: Firewall Client Disconnects
    ... -> Define Connection Limits ... Subject: Firewall Client disconnects? ... reported it was unable to connect to the ISA server. ... The Firewall Client is for ISA 2004. ...
    (microsoft.public.windows.server.sbs)