Re: Web Browser Direct Access not working.

Now I am confused. So I cannot use the default ISA autoproxy script and
direct access a specified web site? It says in that document Jim provided
that you may use the script instead of WPAD and the script gathers it's data
from the list of entires under "Directly access these server or domains:".

Using DHCP and DNS To assign WPAD doesn't work for me in our environment.
Group Policy is working but it doesn't do like it says which is "Directly
Access these servers or domains" I see under monitoring it is still using
the Web Proxy filter it doesn't swtich to NAT.

"Phillip Windell" wrote:

"Dan" <dmorris@xxxxxxxxxxxxxxxxx> wrote in message
news:3A0EE2C6-973B-465F-83F7-3E4A6BA78690@xxxxxxxxxxxxxxxx
server.domain.com resolves to a public IP 72.32.12x.xxx. The ISA sees it
as
just a public IP Address as there are no rules or anything associated with
that IP Address.

Ok. So you really are not "bypassing" anything. You are simply having to
jockey things so that it uses a certain ISA "service" over another. But ISA
will still get used anyway.

Example:
Preventing the Web Proxy Service from taking control causes it to fall back
to the Firewal Service or the SecureNAT Service of the FWC is not installed.

Preventing both the Web Proxy and Firewall Service from getting involved
causes it to fall back to the SecureNAT Service.

Preventing all three Services from being involved just simply causes it to
fail totally unless the LAN independently has a means to privide a separate
path to the destination.

If you use proxy autodetection with WPAD (*not* GPOs) then you will have
much better luck with this.

Jim's link should take care of you.

--
Phillip Windell
www.wandtv.com

The views expressed, are my own and not those of my employer, or Microsoft,
or anyone else associated with me, including my cats.
-----------------------------------------------------



.

Relevant Pages

  • Re: Web Proxy Client - Direct Access to internal web servers of remote subnets not working
    ... I believe that the direct access is correctly configured but that it is not ... Forgot to tell, on the ISA ... server I configured route's to the remote subnets. ... On the client I get ...
    (microsoft.public.isa.clients)
  • Re: HTTPS / SSL Failed Connection Attempt
    ... to then setup the workstation as a securnat client. ... Thanks for your help here but the ISA servers are configured in Single ... At a workstation disable the proxy server settings in internet ... If it works then there is an issue with your direct access setup. ...
    (microsoft.public.isa)
  • Multiple vulnerabilities in PHP-FUSION
    ... Script in fusion_admin/updateuser.php files are not protected against direct access ... and if we go straight to the path we will see standard php error messages, ... or the data on your browser, it depends on the administrator way to backup it, ...
    (Bugtraq)
  • Re: Cant Access Secure Site
    ... Setting up the web site for direct access can be done at the isa ... > (scheme and realm are Orcale terms, ...
    (microsoft.public.isaserver)
  • Re: Apparent intermittent WEB connectivity
    ... Direct access is configured within your internal network object (assuming ... you are using the auto config script) or directly within internet ... > attempts to reach the WEB site domain would have used the Direct Access ... > site, on the other ISA box, too. ...
    (microsoft.public.isa)
Loading