2 NIC ISA 2006 behind a D-LINK Router

I can't seem to get this to work. It may be an IP address
misconfiguration or something else. Here's the setup:
DSL modem with a static external ip address connected directly to a
Dlink router.
Dlink router has an LAN ip of 172.16.1.1 & subnet of 255.255.255.0
ISA 2006 Server which is connected to the LAN port of Dlink router has
the WAN NIC ip address set to 172.16.1.2, gateway is 172.16.1.1 & DNS
set to 192.168.1.253.
ISA 2006 Server has LAN NIC (which is connected to a switch) with an
ip address of 192.168.1.1, DNS set to 192.168.1.253 & no gateway
defined.
There are about 20 other computers connected to the switch that all
receive 192.168.1.x ip addresses & subnet of 255.255.255.0 & gateway
of 192.168.1.1 & DNS of 192.168.1.253 from our domain controller which
is a DHCP server. Thanks alot in advance.
.

Relevant Pages

  • Re: Network Speed issues
    ... the server was clean installed about 2 months ago. ... Well the nic card that I am using for the LAN side is a card and it is a ... dns suffix servername.local ... >> becomes slow network wide, ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: How to network home and office without terminal services??
    ... The browser service does not use DNS. ... the remote client). ... >> As Phillip has already pointed out, you can't browse the remote LAN ... > On the server side port 1723 is forwaded from the router to the ...
    (microsoft.public.windows.server.networking)
  • Re: Setting up Windows Server / Active Directory / DNS for small business
    ... >new setup should look like. ... >(such as users' saved documents on the old NT server will either be burned ... > - It will also be the new DHCP server, and DNS server ... effectively on a seperate network to the LAN. ...
    (microsoft.public.win2000.active_directory)
  • Re: Setting up Windows Server / Active Directory / DNS for small business
    ... >new setup should look like. ... >(such as users' saved documents on the old NT server will either be burned ... > - It will also be the new DHCP server, and DNS server ... effectively on a seperate network to the LAN. ...
    (microsoft.public.win2000.dns)
  • Re: .local and .com
    ... You want to host the mycompany.com DNS outside ... DNS hosting is very inexpensive; ... server for security reasons. ... private DNS visible outside your LAN at all. ...
    (microsoft.public.windows.server.dns)