RE: 504 Proxy timeout only with SSL traffic



OK sorry I reread your post I am showing the following for network
relationships:

Local host access - Route
Internet - NAT

Nothing for internal or DMZ.



"David Maskell - BUI" wrote:

Ok, a few questions:

Is the Internal and DMZ network separated within ISA with two different
network objects? or are they both internal?

What are the network rules between the two networks? NAT/Route?

Does your ISA Server have 3x NICs? ie: one for external, one for DMZ and one
for Internal?


--
David Maskell - BUI
MCSE:Security,Messaging, CISSP.
http://www.bui.co.za


"Always remember to rate the posts!"


"bluenetadmin" wrote:

Hi,

Here is a little more detail on the problem. The webserver sits wihtin our
DMZ and externally anyone can hit the website and all pages whether normal or
secure come up properly. It is only from within the inside that we are
encountering a problem getting to the secure (SSL) Pages.

We have two ISA 2004 Servers both at same level of service packs which is
SP3 for ISA Server 2004 and SP1 for Windows 2003 server.

One thought I had is perhaps it is seeing it on the same network but they
are clearly on different networks. The internal is using a 192 scheme and
the DMZ is using a 10. scheme

This problem only came about after applying service pack 2 for iSA 2004 and
then in thinking that it was a bug I proceeded to apply sp3 to the same
server for ISA 2004.

Thanks for your help

David


"David Maskell - BUI" wrote:

Hi,

This sounds like a very strange problem, its a bit unusual that you can
access the HTTP but not HTTPS pages, can you access the HTTPS pages directly
on the server? Have you checked the IIS Settings?

If the web server works on itself, ie browsing to the localhost, then it may
have something to do with how the proxy is set up, although, in my honest
opinion, it seems to be more the web server than ISA.

Can you access HTTPS pages locally on the webserver is what we need to look
at first?

--
David Maskell - BUI
MCSE:Security,Messaging, CISSP.
http://www.bui.co.za


"Always remember to rate the posts!"


"bluenetadmin" wrote:

Hi I am hoping that someone can help me. We have been running ISA Server
2004 for sometime and then we had a problem with email so I decided to go to
service pack 2 for ISA 2004 server and I started to get this error mentioned
below. I figured perhaps if I went to the next service pack which is SP3 it
might go away and it has not resolved it yet. I am trying to access https
pages on a webserver that is located on our DMZ. I am able to reach the
webserver pages that are not secure pages but once I try to go to the secure
pages it results in this error mentioned below. I have searched all over the
web for a possible fix and I have not been able to figure this out. Any help
would be appreciated. Thanks

Network Access Message: The page cannot be displayed

Technical Information (for Support personnel)
Error Code: 504 Proxy Timeout. The connection timed out. For more
information about this event, see ISA Server Help. (10060)
IP Address: xxx.xxx.xxx
Date: 9/17/2007 5:36:34 PM
Server: server.at.work
Source: proxy


.



Relevant Pages

  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Connect the SBS to a remote IIS for Internet Printing
    ... the server can access the Internet with no problems at all. ... Checking network connection, and after a few seconds it says The ... the problem is cause by the configuration of ISA. ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2006 Basic Configuration
    ... Why would we point Preferred DNS to itself? ... Configuring the Internal Network Interface ... In the Internet Protocol Properties dialog box, ... Select the Use the following DNS server addresses option. ...
    (microsoft.public.isa.configuration)
  • RE: Server Re-Setup Help
    ... This newsgroup only focuses on SBS technical issues. ... If you setup network like above, ... server is transferred in internet since they have different public IP. ...
    (microsoft.public.windows.server.sbs)
  • Re: One computer on 2 networks
    ... On the server take the new "internet Nic" and set it up properly for the ... Create a static route in the OS's routing table that uses the LAN Router ... don't work in the Network Admin Dept. I'm a developer. ...
    (microsoft.public.windows.server.networking)