Re: BMC Control-M

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

there should be an option in the protocol (port) rule... i saw one for
keepalives on the screen when i chose to create a rule for Quest Software
Intrust to collect using its agent...


r
"Marcello Gorlani" <MarcelloGorlani@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:B67960FA-C10D-49EA-8FA9-089DE30D1F61@xxxxxxxxxxxxxxxx
> Hi
> I'm using BMC Control-M to schedule jobs on machine in my DMZ. The manager
> machine is in my Inside Network. Between is ISA2004EE.
> I identified the server contacts clients on tcp port 7006.
> The problem is that when I schedule a job that is taking some time (maybe
> a
> couple of hours) the communication must stay "up" for that time, since the
> client notifies the server for the result of the job.
> ISA drops the connection after some time, so the packets from the client
> to
> the server are dropped, being part of a "dead" connection.
> I cannot find any documentation about this on BMC site. I was looking for
> some keepalive mechanism or some other workaround but with no luck.
> Any ideas?
> Thx


.

Relevant Pages

  • Re: Unable to print to networked printer - get access denied messa
    ... Check the permissions on the server assuming the client has a true RPC ... How is the Standard TCP/IP port configured for the device? ...
    (microsoft.public.windowsxp.print_fax)
  • Re: interfaces lo:1 lo:2 lo:3? (for remote ssh tunnels)
    ... That's the problem tunneling (port forwarding) solves. ... >>can't get past the client firewall. ... > I don't understand why the server would be making the ... server initiates another connection to the client -- in this ...
    (Debian-User)
  • Re: Remote Connection Issue
    ... through port number 3389 and a workstation on the LAN through port number ... I understand that you want to allow a LAN client ... and you have configured server publishing rule ... > By default Terminal Server and Windows 2000 Terminal Services uses TCP ...
    (microsoft.public.windows.server.sbs)
  • Re: RealVNC
    ... Default listening port for RealVNC server that runs on the machine on which ... Then there is default Java listening port on port 5800 on the client machine ...
    (microsoft.public.windows.server.sbs)
  • Re: Redirecting data sent to a local printer to another host and port on the network
    ... All client workstations have access to the ... simply redirecting netcat traffic on port 9100 to port 515 on ... Only LPR clients talk to LPD print server daemons. ... >workstation at the branch site where the print job originated. ...
    (comp.unix.sco.misc)