Re: Monitoring Usage

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Someone or something is using all my bandwidth again. After giving up
finding them with the monitor tool I stopped the ISA job scheduler and the
bandwidth was released. Usage is now below 10% as it should be... Does that
service need to be running? If I stop it what will stop?

Regards,
Scott

"Phillip Windell" wrote:

> I don't have one in front of me to look at,..but I thnk it is refered to as
> "networks" and I think it is listed according to the MAC address of the Nic.
> So find the MAC address of each Nic then use it in Network Monitor to
> specify which Nic you want to listen on when you get ready to do a capture.
>
>
> --
>
> Phillip Windell [MCP, MVP, CCNA]
> www.wandtv.com
>
>
> "stosti" <stosti@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:8454C207-8350-4659-9C38-88F1FD39371A@xxxxxxxxxxxxxxxx
> > Hi,
> >
> > How do you select an interface to monitor?
> >
> > Thanks!
> >
> > "Phillip Windell" wrote:
> >
> > > Run Network Monitor on the Extenal interface of ISA. It will show the
> > > Bandwidth used and what the packets are that you have the most of.
> After
> > > that you may also have to run it against the Internal Nic to see what
> Client
> > > it is comming from after you know what you are looking for.
> > >
> > > ISA's "Reports" can be of some help as well.
> > >
> > > --
> > >
> > > Phillip Windell [MCP, MVP, CCNA]
> > > www.wandtv.com
> > >
> > >
> > > "stosti" <stosti@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > news:B8586E46-F568-467C-9D33-D277615F2A87@xxxxxxxxxxxxxxxx
> > > > NO! My router is telling me the bandwidth is at 98%. I need to know
> what
> > > IP
> > > > is using the bandwidth...
> > > >
> > > > "Phillip Windell" wrote:
> > > >
> > > > > How do you know it is "maxed out"? The same thing that tells you it
> is
> > > > > "maxed out" should also tell you what it is "maxed out" with.
> > > > >
> > > > > --
> > > > >
> > > > > Phillip Windell [MCP, MVP, CCNA]
> > > > > www.wandtv.com
> > > > >
> > > > > "stosti" <stosti@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > > > news:D6A3810C-E8D8-4C74-B8EC-5871F53152B0@xxxxxxxxxxxxxxxx
> > > > > > Is there a way to easily see what users are using the most
> bandwidth?
> > > My
> > > > > T1
> > > > > > is maxed out and I need to know who is doing this.
> > > > > >
> > > > > > Thanks!
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
>
>
>
.

Relevant Pages

  • Re: Supercard
    ... monitor actually switched the luminance channel to higher bandwidth ... spacing in monochrome mode was pretty much enough. ... will use the full bandwidth of the luminance signal, ... Connecting the Apple II video straight to the luma of the svideo input, ...
    (comp.sys.apple2)
  • Re: Has anyone tried a SCART to HDMI converter with their GS?
    ... Some threads I've read seem to indicate that SCART monitor is ideally ... you can connect the IIgs directly to such ... The IIgs is counting on a limited bandwidth monitor ...
    (comp.sys.apple2)
  • Re: How to start Ethereal capture at network usage threshold?
    ... To monitor bandwidth you must capture ALL packets on the network. ... If you want to monitor between certain times you may need to use Windows Task ...
    (microsoft.public.windows.server.networking)
  • Re: Bandwidth Monitor
    ... Soon to be available 8mb Bandwidth, the snag is it has a 20gb bandwidth ... Before taking the plunge is there any software which I can install to ... to monitor the router. ... difference between internet network activity, ...
    (uk.comp.sys.mac)