Outgoing VPN Error 619

Hi I'm getting the following error when trying to establish out going VPN's
on ISA 2006:

Error 619: A connection to the remote computer could not be established, so
the port used for this connection was closed. For further assistance, click
More Info or search Help and Support Centre for this error number.

I have a rule allowing all outbound traffic and the PPTP filter is enabled.
Anyone know what I can do to get outbound VPN's working?

Cheers

Damon



.

Relevant Pages

  • Re: RWW not working externally (R2)
    ... Don't have ISA on my machine although I'm thinking of adding it back now that the firewall client is available for Vista ... Ethernet adapter Server Local Area Connection: ... If you connect to the Remote Web Workplace from a computer that is internal to the ISA Server, and you have Firewall Client software installed on your computer, you must configure a protocol rule on your ISA Server. ...
    (microsoft.public.windows.server.sbs)
  • Re: TS disconnects when minimized a couple minutes
    ... What about is the server does not have ISA 2000/2004 on it - Any suggestions ... Please try connecting to the remote computer again". ... the connection will be disconnected after ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW not working externally (R2)
    ... I am running ISA 2004, ... Ethernet adapter Server Local Area Connection: ... Set a protocol rule on your ISA Server ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN/ISA 2004 issue after SP1 install on sbs2003
    ... The Draytek is the device that is making the connection ... There is GRE communication between the router and the SBS you can see ... We have contacted Draytek and they are not aware of any specific ... I am fairly sure ISA will accept MPPE ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW not working externally (R2)
    ... There's a rule for RWW Inbound Access, enabled, set to Allow, All Users. ... For some reason every time I click the Protocols tab the ISA MMC crashes, ... Ethernet adapter Server Local Area Connection: ... Set a protocol rule on your ISA ...
    (microsoft.public.windows.server.sbs)