MSVPN behind Cisco 800 series

Sorry this is a bit off topic, I usually deal with ISA, but this time I have
to set it up behind a Cisco 800 series router, and don't know how.

I've set it up so port 1723 goes to the MSVPN server, and protocol 47 (gre)
is allowed, but it won't work. Can someone point me to some instructions or
a good place to ask this question?

From the current router config...

!
interface Dialer1
ip access-group 102 out
!
ip nat inside source static tcp 192.168.0.1 1723 interface Dialer1 1723
!
access-list 102 permit tcp any any eq 1723
access-list 102 permit gre any any

Thanks, Neal


.

Relevant Pages

  • Re: PIX VPN help.
    ... have to use to connect to the remote host. ... static 192.168.100.0 192.168.10.0 netmask ... access-list 100 permit tcp any host a.a.a.102 eq ident ... access-group 100 in interface outside ...
    (comp.dcom.sys.cisco)
  • Re: PIX VPN help.
    ... have to use to connect to the remote host. ... static 192.168.100.0 192.168.10.0 netmask ... access-list 100 permit tcp any host a.a.a.102 eq ident ... access-group 100 in interface outside ...
    (comp.dcom.sys.cisco)
  • Re: PIX VPN help.
    ... have to use to connect to the remote host. ... static 192.168.100.0 192.168.10.0 netmask ... access-list 100 permit tcp any host a.a.a.102 eq ident ... access-group 100 in interface outside ...
    (comp.dcom.sys.cisco)
  • Re: PIX VPN help.
    ... have to use to connect to the remote host. ... static 192.168.100.0 192.168.10.0 netmask ... access-list 100 permit tcp any host a.a.a.102 eq ident ... access-group 100 in interface outside ...
    (comp.dcom.sys.cisco)
  • Re: PIX VPN help.
    ... isakmp policy 40 authentication pre-share ... have to use to connect to the remote host. ... access-list 100 permit tcp any host a.a.a.102 eq ident ... access-group 100 in interface outside ...
    (comp.dcom.sys.cisco)
Loading