VPN Shares & Netgear DG 834

Hi All

I hope I have posted in the correct section.

I have a problem that I cannot seem to map a network drive through a VPN
connection even though the tunnel is established and I can ping the server at
the other end from the remote computer - the error I am getting is network
path not found - the command I am using is net use H: \\10.0.2.2\Documents

Here is the setup:

At one end I have a Multitech 660VPN router with an IP of 10.0.1.1 on a LAN
of 10.0.1.xx

At the other end there is a NetGear DG834 VPN router with an IP of 10.0.2.2
on a LAN of 10.0.2.xx

I cannot understand why I can ping the server at each end which "in theory
means" the tunnel is established and the routing is fine but cannot map a
drive even when I am using the same IP as the one that I pinged

If anyone can help it would be most appreciated as I have tried all
combinations but nothing seems to work – although I did manage to map a drive
once and then could npot duplicate what I had done.

BTW – Terminal services works fine at both sites

Thanks for your time

Ray

--
Message posted via WinServerKB.com
http://www.winserverkb.com/Uwe/Forums.aspx/isa-vpn/200610/1

.

Relevant Pages

  • Re: Windows CE browse network via VPN
    ... The guys at symbol tell me that it is becuase Windows mobile cannot map ... I have a VPN set up between our offices in VA and FL. ... BUT I am unable to map to a shared drive accross the VPN. ... connection but cannot access any network resources. ...
    (microsoft.public.windowsce.app.development)
  • RE: Secure Windows Domain auth for Cisco 2691 to Win2k or NT 4 Sever via Radius
    ... the dynamic VPN tunnels) into the static map you have set up for your static ... VPN tunnels. ... Anyway i setup a dynamic vpn pool ...
    (Security-Basics)
  • pix nat questions
    ... crypto map * 10 set peer * ... crypto map * 10 set transform-set 3des ... #using an acl that just tests tunnel from a host on net A, ... and i'm not clear on whether i should be using a nat statement to policy map the vpn traffic or a static. ...
    (comp.dcom.sys.cisco)
  • Re: VPN Shares & Netgear DG 834
    ... talk about running VPN software on the Server and not using the built in VPN ... I have a problem that I cannot seem to map a network drive through a VPN ... At one end I have a Multitech 660VPN router with an IP of 10.0.1.1 on a LAN ...
    (microsoft.public.isa.vpn)
  • Re: Server Access on VPN
    ... If you know the name of the share you want to map to, ... won't show you the network neighborhood like it does when on the LAN. ... >> Browsing is always difficult with a vpn connection. ...
    (microsoft.public.windows.server.sbs)