VPN Working but 0 traffic at log?!?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I have on problem at my VPN log, i don´t konw if it is just one log problem
or there are some other problems hidden.

I look it up at microsoft.com, google ... but get not
answer. I would apreciate very much any idea about this issue.






I have a win 2k VPN Server. This server is at Domain.

I have no problem having VPN connections (PPTP) but if i look at VPN log or
Event Viewer-Sistem-Remote Access for some user it says:

"0 bytes send 0m bytes received"

After been connected for 4 hours and done many things (= traffic)

how can that be possible???

Here is the event:

Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20048
Date: 7/13/2004
Time: 5:06:02 PM
User: N/A
Computer: VPN
Description:
The user SECURITAS\pepe connected on port VPN3-127 on 07/13/2004 at 05:05pm
and disconnected on 07/13/2004 at 09:06pm. The user was active for 4 hours
0 minutes 32 seconds. 0 bytes were sent and 0 bytes were received. The port
speed was 10000000. The reason for disconnecting was user request.



Many thanks



.

Relevant Pages

  • Re: Have two routers, but VPN cannot see beyond VPN server
    ... Netgear DG834G --> ... VPN Server ... When I VPN in I am on a new network which the VPN server creates in which only the VPN server and the internal router are visible. ... I don't mind where or what the VPN server is, but I'm not sure how to set it up any way other than getting the SBS to deal with the VPN connections and the routing of those VPN connections. ...
    (microsoft.public.windows.server.sbs)
  • Re: Checkpoint Firewall-1 VPN 4.1 SP3 problems
    ... Standard question, what info are you seeing in the logs, VPN log in ... > I've just set up a VPN tunnel between our primary UK site and our Indian ... > Something must have changed because SecuRemote users now can't access our ... > the two UK networks and the network of the serial interfaces of our Cisco ...
    (comp.security.firewalls)
  • Re: VPN Working but 0 traffic at log?!?
    ... disconnect in the user VPN connectoid properties or via Remote Access Policy ... >I have on problem at my VPN log, i donīt konw if it is just one log problem ... The reason for disconnecting was user request. ...
    (microsoft.public.win2000.security)
  • VPN Working but 0 traffic at log?!?
    ... I have on problem at my VPN log, i donīt konw if it is just one log problem ... I have a win 2k VPN Server. ... I have no problem having VPN connections but if i look at VPN log or ... The reason for disconnecting was user request. ...
    (microsoft.public.win2000.security)
  • Re: VPN
    ... The VPN connections require a VPN server so that the VPN remote client can ... I do not believe that XP has a VPN server. ...
    (microsoft.public.windowsxp.general)