VPN Batch file

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Joe Bucar (jbucar_at_hotmail.com)
Date: 02/19/04 

Date: Thu, 19 Feb 2004 10:45:48 -0500

Hello,
I have a VPN connection over the internet using a linksys befvp41 router.
The problem that I need to solve is that the router disconnects after 5
minutes of inactivity. I have an SQL application that runs when data is
received. My problem is the SQL links are not up when needed. What I need
is a batch job that pings the connection and determines if the VPN is up and
if the connection is down be able to get into the admin screen of the
linksys router and re-connect the connection.

Joe

Relevant Pages

  • Re: Unable to establish the VPN connection. The VPN server may be
    ... Router 192.168.3.1 DHCP server ... >> or security parameters may not be configured properly for this connection. ... What about the ISA logs? ... If you can get a VPN connection but authentication times ...
    (microsoft.public.windows.server.sbs)
  • Re: Intermittent VPN connection problems
    ... However, about 20% of the time, the attempt to connect fails with "Error 800: Unable to establish VPN connection. ... did a firmware upgrade to a router that didn't actually stop VPN ...
    (microsoft.public.windows.server.sbs)
  • Re: Use of Multiple Public IP Addresses
    ... The whole point of setting up a VPN connection is for the remote client to have access to the private LAN. ... Linksys BEFSR41 router for connecting to the VPN NIC? ...
    (microsoft.public.windows.server.networking)
  • Re: Help needed Using Remote Desktop Connect
    ... First, if your office requires a VPN connection, then your VPN software must be loaded and logged in on your home PC. ... you need to configure your router to forward port 3390 to your home computer's IP address. ...
    (microsoft.public.windowsxp.basics)
  • Re: VPN woes
    ... Are you aware that the Westell 2200 is a router as well as a modem? ... > establish VPN connection to it. ...
    (microsoft.public.windows.server.sbs)