Re: Publishing a SSH Server

Hello Jim

In that case the server is a SecureNET client but still it doesn't work....
I'm really clueless with this thing. What would you do?

Regards

"Jim Harrison (MSFT)" wrote:

The IP settings on that box will use the ISA as the "last hop" to the Internet.
If ISA and the Linux box are in the same subnet, it will use the ISA internal IP as its default gateway.
If not, it will use the default gateway of the nearest router and your routing chain will use the ISA as the "last hop".
--
--
Jim Harrison [ISA SE]
Read the help, books and articles!

This posting is provided "AS IS" with no warranties, and confers no rights.

"Wilmar" <Wilmar@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:5F275AFB-49DA-4566-92A5-4ABAE438D95B@xxxxxxxxxxxxxxxx
I'm testing from the external network. From the internal network and from
the ISA Local I can access the SSH server without problem. Just a question:
the SSH server run on a Linux box, do you know how I make sure it's running
as a SecureNET client?

Thanks

"Jim Harrison (MSFT)" wrote:

That's a potentially important point.
Server publishing requires that the published server be configured as a SecureNET client (uses ISA as the "last hop" to the
Internet)
Web publishing does not.

Where are you testing from; internal, ISA-local or external?
--
--
Jim Harrison [ISA SE]
Read the help, books and articles!

This posting is provided "AS IS" with no warranties, and confers no rights.

"Wilmar" <Wilmar@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:3181A0DA-5D11-4D28-8502-510F81D0D89D@xxxxxxxxxxxxxxxx
Hello Jim

I also would like to let you know that in the same SSH server I'm trying to
publish, there's also a Web server that works without any problem and which I
was able to publish without any complication.

Thanks

"Jim Harrison (MSFT)" wrote:

Exactly how is your custom protocol defined?
What is the defined relationship between the two networks; NAT or route?

--
--
Jim Harrison [ISA SE]
Read the help, books and articles!

This posting is provided "AS IS" with no warranties, and confers no rights.

"Wilmar" <Wilmar@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:AB9855CA-9D3C-44E7-9277-CCDEF8C0F20E@xxxxxxxxxxxxxxxx
Hello everybody.

I'm trying to publish an internal SSH server without much success so far.
What I did was to use the Server Publishing Rule and createa SSH server
protocol listening on inbound connection to port 22 through the external
interface and redirecting the request to the internal IP address of the SSH
server. Everytime I try to connect from an external clients the connection
just gets drop by the Default Rule.

I hope anyone can give me a hint on this.

Thanks a lot.

Wilmar









.

Relevant Pages

  • Re: HTTP Redirector to Web Proxy Service not working
    ... It will forever remain a mystery why a perfectly functioning server stopped working temporarily but oh well. ... "Jim Harrison " wrote: ... > I have an existing server W2003 that was rebooted and suddenly ISA wasn't working as expected. ... The minute I set it back to "Redirect to local Web Proxy ...
    (microsoft.public.isa.configuration)
  • Re: Publishing with 2 NICs
    ... service on a different server. ... "Jim Harrison " wrote in message ... > Jim Harrison [ISA SE] ... > RWW the other card x.x.x.4 I am going to publish to the other server. ...
    (microsoft.public.isa.publishing)
  • Re: acces rules
    ... save the settings, windows says LDAP cannot be used for this, use another ... "Jim Harrison (ISA SE)" wrote: ... Did you join the server to the domain before or after you installed ISA? ...
    (microsoft.public.isa)
  • Re: Error message on logging in to TechNet
    ... It's odd that our DNS server will resolve everything but this. ... "Jim Harrison (ISA SE)" wrote: ...
    (microsoft.public.isa.configuration)
  • Re: Publishing a SSH Server
    ... What do your ISA logs show for that traffic? ... Jim Harrison ... In that case the server is a SecureNET client but still it doesn't work.... ... I'm testing from the external network. ...
    (microsoft.public.isa.publishing)
Loading