What IP for Ex behind ISA and h/w firewall?

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Lewej (Lewej_at_discussions.microsoft.com)
Date: 02/28/05

  • Next message: Bernd Kruczek - [MVP Exchange]: "ISA 2004, Exchange Server publishing" 
    Date: Mon, 28 Feb 2005 10:39:36 -0800

    Hi
    If I had a router with a static public IP (35.124.124.210), and private
    inside (192.168.1.0)to go to a pIX firewall (192.168.1.0) outside
    (172.16.1.0) inside, that NAT to another private IP to ISA (172.16.1.0)
    outside and(10.0.0.0) inside - in which IP range should I use to 'publish' my
    exchange 20003 server?
    The documentation says the outside interface of the ISA - but I cannot quite
    see how this is going to work. Would I use the public IP address and then
    just get all smtp port25 traffic forwarded to the ISA outsidse interface from
    the router?
    TIA
    Lewej

  • Next message: Bernd Kruczek - [MVP Exchange]: "ISA 2004, Exchange Server publishing"

    Relevant Pages

    • Re: Creating a static route in ISA
      ... create a private link between the two networks, ... Protocols access between the two networks. ... static routes to the Windows routing tables of each ISA ... not a router. ...
      (microsoft.public.isa)
    • ISA and Exchange 2000 - 1 Pubilic IP on Router
      ... I have had to move my server to my house for a short ... I have 1 public IP that is on my router. ... NIC I have been using for the external NIC in ISA. ... have had to use a private IP on that NIC. ...
      (microsoft.public.isa)
    • Re: changing IP adress
      ... > how do I change a private IP adress? ... > you have configured your router to give out a certain IP by MAC ... You never mentioned that you had an email with a remote assistance request ...
      (microsoft.public.windowsxp.work_remotely)
    • Re: Router ISA OWA and VPN
      ... When ISA is installed - its the same as any other web page error - page ... The router I have is a Sitecom WL-025. ... smtp - port 25 ... You have two nics in the SBS, ...
      (microsoft.public.windows.server.sbs)
    • Re: NICs configuration
      ... but adding that if you do put a nat router in ... router/firewall on .1 and the SBS wan nic on .2, ... If you wanted to implement either a true router or a routing ... ISA (with a public IP in the DMZ, also subject to port restriction from ...
      (microsoft.public.windows.server.sbs)