Publishing SBS 2008 with ISA 2006
I am attemting to set up ISA 2006 and SBS 2008 in the following configuration.
ADSL MODEM/Router => ISA 2006 => SBS 2008. (Ports forwarded by router to
ISA). I can't seem to get the RWW, activsyn over http etc working in this
configuration. I also am unable to find any documentation supporting this
configuration. Is it possible to publish SBS 2008 supporting RWW, Activesync,
OWA etc using this configuration. If not, how do I connect to the internet.
Do I have to connect the ISA server to the internet by setting the ADSL
MODEM/Router in bridging mode and then setting up a PPOE/PPOA connection from
the ISA box?
- Re: Still cant connect to RWW or OWA remotely
... I still cannot access RWW or Exchange using your suggested settings. ... it certainly appears to be something about the SBS configuration. ... Meridian.local Ethernet adapter Local Area Connection: ...
- Re: SBS R2 ISA2004 Dark Arts
... You'll have to use ISA ... I have to get the back firewall configuration to work with the ... I have lots of NICS on the server running SBS 2003 R2. ...
- Re: ISA 2004 and SBS
... a configuration which as you say is significantly more ... than if nothing else but ISA was running on the Server. ... been identified which will probably delay an SBS ...
- Re: Cannot setup ISA email alerts
... Let's back up just a sec and review your configuration. ... - This is an ISA running on your SBS, ... > Exchange should be automatically forwarded from Exchange to your ISP SMTP ...
- Re: SBS Premium & ISA Server
... front-end / back-end firewall configuration. ... Put that web server behind the front-end ISA so you can take ... the web server external to your SBS / LAN. ...