Re: Access POP3 through ISA2000
- From: "Bret Snipes" <technokid@xxxxxxxxxxxxxxxx>
- Date: Mon, 17 Sep 2007 22:27:35 -0500
Thanks for the help. The problem was resolved. I changed the ip address
for the pop3 virtual server from the internal ip address to (ip unassigned)
restarted the pop3 service and bang it worked. Thanks for the help
Bret
"Mohammad Ghavidel" <MohammadGhavidel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:388AC368-2687-416B-8BD7-210535E141E3@xxxxxxxxxxxxxxxx
http://www.microsoft.com/technet/isa/2000/deploy/isaexch.mspx
--
Mohammad Ghavidel MCSE 2000 & 2003
"Bret Snipes" wrote:
I looked at the log files but do not see anything that pertains to pop3
(110). I looked in all 3 types of log files. Now, it does not seem to
be
real time as I tried to connect via pop3 but did not see an error. Are
the
realtime logs somewhere else?
Also, I want to confirm I have pop3 configured correctly, is there a doc
available to explain how to config to allow outside users to access mail
via
pop3 through an isa2k?
Bret
"Mohammad Ghavidel" <MohammadGhavidel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:46A6DA3A-2A31-4A0C-9E1C-F04AC0A885D1@xxxxxxxxxxxxxxxx
you can configure ISA2k log files types and also view them by :
servers and arrays \server name\monitoring and configuration\logs.
--
Mohammad Ghavidel MCSE 2000 & 2003
"Bret Snipes" wrote:
Our "external router" is a cable modem set to bridge mode so it should
not
be blocking anything. I have also checked with our ISP and all ports
are
open so they are not blocking anything.
Where does ISA write their log files.
"Mohammad Ghavidel" <MohammadGhavidel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote
in
message news:EC4F850F-065F-448F-8EEB-2EFC971C7CAC@xxxxxxxxxxxxxxxx
check your external router to ascertain that pop3 will not be
blocked
out
there.see isa log files and write us some filtering errors if ther
are.
--
Mohammad Ghavidel MCSE 2000 & 2003
"Bret Snipes" wrote:
I have a SBS2000 box that I need to allow an outside client to get
their
mail via pop3. I have the POP3 service running and verified via
telent
that
it works internally. I am unable to connect externally via telnet.
I
have
configured ISA to allow POP3
I have tried to custom configure an incoming IP Packet Filter and
used
the
ICW to to allow incoming POP3. Neither allowed incoming POP3. I
also
created a custom POP3 protocol rule to allow POP3. Still cannot
connect.
I
used the following paper from MS as a guide
ISA Server 2000 Feature Pack 1
Publishing POP and IMAP Services Using Microsoft ISA Server
thanks
Bret
.
- References:
- Access POP3 through ISA2000
- From: Bret Snipes
- Re: Access POP3 through ISA2000
- From: Bret Snipes
- Re: Access POP3 through ISA2000
- From: Bret Snipes
- Re: Access POP3 through ISA2000
- From: Mohammad Ghavidel
- Access POP3 through ISA2000
- Prev by Date: Re: ISA 2004 + FW client FTP config?
- Next by Date: Re: Creating an outbound mail rule
- Previous by thread: Re: Access POP3 through ISA2000
- Next by thread: Re: Forms Authentication
- Index(es):
Relevant Pages
|
