Re: Is it possible to configure ISA Server 2000 standard to utilize more than one internet connection?

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

No; this is being examined for the next version.

--
Jim Harrison (ISA SE)

This posting implies no warranty and confers no rights.
http://catb.org/~esr/faqs/smart-questions.html



"Patrick" <FeelinDumb@xxxxxxxxxx> wrote in message
news:part1of1.1.FUYdZ8hcWC74UQ@xxxxxxxx
Is it possible to configure ISA Server 2000 standard to utilize more than
one
internet connection?

what I am attempting to do is set up the server so that if for some reason
the
internet connection on one network card fails it will fail over to a
network
card with a separate internet connection... I have three NIC cards in the
system one connects to the network. One connects to a DSL modem and now a
third
connects to a cable modem.

I desire to have the system utilize the dsl modem during normal operation
and
when the dsl modem connection stops traffic (such as when they reboot the
d-slam) I would like the ISA server to "roll over to" the Cable
connection.

.

Relevant Pages

  • Re: Getting an IP Address
    ... it appears you have both a "network card" ... A normal home network connection with a router goes like this: ... Wall Jack to DSL Modem (normal phone wire connection without the DSL ... DSL Modem to Router ...
    (microsoft.public.windowsxp.network_web)
  • Re: RWW not working externally (R2)
    ... Don't have ISA on my machine although I'm thinking of adding it back now that the firewall client is available for Vista ... Ethernet adapter Server Local Area Connection: ... If you connect to the Remote Web Workplace from a computer that is internal to the ISA Server, and you have Firewall Client software installed on your computer, you must configure a protocol rule on your ISA Server. ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW not working externally (R2)
    ... I am running ISA 2004, ... Ethernet adapter Server Local Area Connection: ... Set a protocol rule on your ISA Server ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN/ISA 2004 issue after SP1 install on sbs2003
    ... The Draytek is the device that is making the connection ... There is GRE communication between the router and the SBS you can see ... We have contacted Draytek and they are not aware of any specific ... I am fairly sure ISA will accept MPPE ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW not working externally (R2)
    ... There's a rule for RWW Inbound Access, enabled, set to Allow, All Users. ... For some reason every time I click the Protocols tab the ISA MMC crashes, ... Ethernet adapter Server Local Area Connection: ... Set a protocol rule on your ISA ...
    (microsoft.public.windows.server.sbs)