Re: open a certain port

shijaz:

I am not trying to make hard on you but on IE I have the proxy check to my
firewall and port 8080. I have bypass proxy server for local addresses
checked. My firewall client is enabled.

The only thing is what you mentioned below about the default gateway. I am
not sure I understand. I have my network card default gateway pointing to my
firewall by default through my DHCP settings. Is that wrong.

Are you in the US. If so, I would like to speak to you. We are a non profit
org and we can not afford to pay to solve this problem but we appreciate the
help.

Thanks,







"Shijaz" <Shijaz@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:425A66E3-C120-44C7-932A-79F63DC80598@xxxxxxxxxxxxxxxx
- Do not set the default gateway on your client as the ISA internal IP.
- Simply install and enable the Firewall client software installed on your
machine.
- On IE, set the option to bypass proxy for internal addresses
- If all above is OK and you still face problems, then add the range to
LocalLAT.txt of the client machine.


--
Shijaz
MCSE:Security, CCNA
www.shijaz.com/isaserver


"Dooma" wrote:

What do you recommend?


"Shijaz" <Shijaz@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:662EF82B-E44E-427F-BDE8-918348F88BAE@xxxxxxxxxxxxxxxx
Yes. Are you having your default gateway set to ISA server? You don't
need
to
have your DG set to your ISA because then what you have is a secureNAT
client.

Shijaz


"Dooma" wrote:

Below is exactly what I did after I created the LocalLAT.txt

192.168.22.1 192.168.22.254

Is that correct?



"Shijaz" <Shijaz@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F5241684-5B2A-4EF4-BED5-009F8A1F49E5@xxxxxxxxxxxxxxxx
Are you sure you added 192.168.22.11 in the LocalLAT file on the
client?

ISA 2004 by default allows only SSL through port 443. However you
can
extend
it to any custom range (like 5250). See the article below:
http://www.isaserver.org/articles/2004tunnelportrange.html


--
Shijaz
MCSE:Security, CCNA
www.shijaz.com/isaserver


"Dooma" wrote:

One more thing. this is the address of the server that is being
blocked
by
ISA

https://192.168.22.11:5250/spin/SelfAdmin/SelfAdmin.csp




"Shijaz" <Shijaz@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D24DDC71-F63F-4A41-8237-02F5DE8560F6@xxxxxxxxxxxxxxxx
To bypass ISA while accessing a particular internal website while
using
a
FIrewall Client, see:
http://www.shijaz.com/isaserver/bypass_isa.htm

--
Shijaz
MCSE:Security, CCNA
www.shijaz.com/isaserver


"Dooma" wrote:

I have computer associate anti spam software 8.0. When it sends
it
report
to
the user. it uses a secure http with port 5250 on the local
server.
ISA
block this transmission even though it is on a local IP address.
When
I
disable the ISA client I am able to access the secure site on
port
5250.
My
question is:

1. How can I bypass local IP addresses other than from IE. I
tried
the
IE
bypass local IP addresses but it did not work?
..

2. If the above feature does not work, is there a way to open
port
5250
on
ISA?

Thanks,















.

Relevant Pages

  • Re: Remote Admin Tools source code for Delphi 4,5,6 & 7
    ... this way I guess the traffic is outbound form the client to ... be remoted and opens up a channel on the firewall. ... the actual client you are going to remotely control. ... all using the same configuration and one Port on your machine. ...
    (borland.public.delphi.thirdpartytools.general)
  • Re: two way communication using NAT and port forwarding
    ... >> How does instant messengers like ICQ work from behind the firewall. ... >> seems to be done using NAT or port forwarding. ... A central server maintained by the creators of the messenger ... >> When the client messenger initiates a request from private IP like ...
    (comp.security.firewalls)
  • RE: RWW and New Firewall Problem
    ... firewall, the network configuration was also changed. ... Once the connection is established on port ... client at port 3389. ... What you cannot visit in RWW, is the computer Terminal Server or just ...
    (microsoft.public.windows.server.sbs)
  • fwop: win32 tcp port proxy tool
    ... fwop is a multi-threaded console application written in C for win-32 ... through a firewall or router with access lists that blocks such traffic. ... high tcp port (>1023} and use that port to connect to the server's tcp ... fwop on the client listens on two ports. ...
    (Pen-Test)
  • Re: How to bypass blocked ports
    ... > I would like to know if there is a way to bypass a Firewall that ... > blocks a port. ... > network restricted by firewall. ... Of course utilities like ftp, ...
    (comp.security.firewalls)