Re: DHCP Relay on ISA

Under the Relay Agent - Do I need to add a Network Connection? If so, LAN
or Internal?

Do I need any Access Rules at all?

"Phillip Windell" <@.> wrote in message
news:%23lLk9x67FHA.3876@xxxxxxxxxxxxxxxxxxxxxxx
> There are no DHCP Services on ISA, and there should not be.
>
> The Relay Agent is part of RRAS. You have to add and enable it within
> RRAS
> Admin.
>
> After that,..in RRAS Admin, right-click on the Server Name and pick
> Properties,...pick the IP Tab,...make sure that the Connection
> representing
> the ISA Internal Nic is chosen as the Adapter in the drop-down list at the
> bottom of the dialog box.
>
> --
> Phillip Windell [MCP, MVP, CCNA]
> www.wandtv.com
> -----------------------------------------------------
> Understanding the ISA 2004 Access Rule Processing
> http://www.isaserver.org/articles/ISA2004_AccessRules.html
>
> Microsoft Internet Security & Acceleration Server: Guidance
> http://www.microsoft.com/isaserver/techinfo/Guidance/2004.asp
> http://www.microsoft.com/isaserver/techinfo/Guidance/2000.asp
>
> Microsoft Internet Security & Acceleration Server: Partners
> http://www.microsoft.com/isaserver/partners/default.asp
> -----------------------------------------------------
>
>
>
> "SD" <smd6169@xxxxxxxxxxx> wrote in message
> news:OKXM8727FHA.2616@xxxxxxxxxxxxxxxxxxxxxxx
>> ...on a thought, if DHCP Services are not installed on my ISA 2004, do I
>> need the Relay Agent on the ISA box to forward DHCP Requests from my VPN
>> Clients to the Internal DHCP server?
>>
>>
>> "SD" <smd6169@xxxxxxxxxxx> wrote in message
>> news:%23oepd227FHA.252@xxxxxxxxxxxxxxxxxxxxxxx
>> > Having read the TechNET article "Configuring the DHCP Relay Agent on
>> > ISA
>> > Server 2004", I am still unable to get this to work properly. Has
> anyone
>> > been able to install the DHCP relay agent on an ISA 2004 box and
>> > successfuly assign INTERNAL ip's to your VPN users? If so, can you
> please
>> > share all the settings you had to configure? My ISA Server IS NOT a
> DHCP
>> > Server.....
>> >
>> > I confirmed that my SYSTEM POLICY DHCP setting is enabled and as per
>> > the
>> > above article I did set-up 3 Access Rules as followes:
>> >
>> > 1. DHCPRequest [INTERNAL to Local Host]
>> > 2. DHCPReply [Local Host to INTERNAL]
>> > 3. DHCPRelayAgent [Local Host to DHCP Server]
>> >
>> > SD
>> >
>> >
>> >
>>
>>
>
>


.

Relevant Pages

  • Having great trouble with ISA 2004 on a Windows 2003 Server.
    ... I have a Windows 2003 Active Directory server, with two NICS, one ... I could control who can browse the internet and possible only at ... now since I have installed ISA 2004 with SP2. ... Management I am receiving a denied connection for DHCP requests. ...
    (microsoft.public.isa)
  • Having great trouble with ISA 2004 on a Windows 2003 Server.
    ... I have a Windows 2003 Active Directory server, with two NICS, one ... I could control who can browse the internet and possible only at ... now since I have installed ISA 2004 with SP2. ... Management I am receiving a denied connection for DHCP requests. ...
    (microsoft.public.isa)
  • Re: dhcp not working
    ... isa 2004 not isa 2000? ... And then re-run CEICW and of course DHCP needs to be installed ... You do have the internal nic of the server and the workstations plugged ... nics, 1 direct to the internet into a cable modem, static ip ...
    (microsoft.public.windows.server.sbs)
  • Re: No DHCP?
    ... You are talking about LAT which is ISA 2000 and then ... I do not see LAT ... rule called SBS Localhost Dhcp Access Rule. ... via DHCP and I monitor the ISA traffic I see them hit the SBS Internet Access ...
    (microsoft.public.windows.server.sbs)
  • Re: DHCP between networkcards
    ... I did this,install relay agent in the RRAS and add the interface of your perimiter network,in the relay agent properties type the DHCP server IP address and it'll work ... It requires a "service" to receive them and then to pass them on to a DHCP Server ... I have never done it with an ISA doubling as a LAN Router,...but I suspect it would require using the DHCP Relay Agent in RRAS on the ISA Box. ...
    (microsoft.public.isaserver)