Re: How to setup a Web Site on the ISA Server 2004 machine?

Tech-Archive recommends: Speed Up your PC by fixing your registry



A reboot solves the problem (as always).

Olav

"Olav Tollefsen" <x@xxxxx> wrote in message
news:Ocjt4KZQFHA.3496@xxxxxxxxxxxxxxxxxxxxxxx
>I would really like to install a Web Site on the ISA Server 2004 computer.
>
> I have a 3-leg perimeter configuration and have partly followed the
> instructions found here:
>
> http://www.isaserver.org/articles/2004ispcolo.html
>
> I installed and configured ISA Server 2004 first and it's up and running
> with the External (10.0.0.32), Internal (192.168.1.32) and Permeter
> (192.168.2.32) networks netup to theree different networks cards.
>
> Now I would like to add IIS to the box and setup a Web Site. I have
> installed IIS and followed the instructions for disabling socket pooling
> for the IIS service by issuing the command "httpcfg set iplisten -i
> 192.168.2.32" ( I figured I wanted to server my IIS site on the Perimeter
> NIC address). I have also set the IP address of the web site to
> "192.168.2.32".
>
> The problem is that when I start the IIS service, I get the following
> entries in the Event Log:
>
> - Unable to bind to the underlying transport for 0.0.0.0:80. The IP
> Listen-Only list may contain a reference to an interface which may not
> exist on this machine. The data field contains the error number.
>
> - Cannot register the URL prefix 'http://192.168.2.32:80/' for site '1'.
> The site has been deactivated. The data field contains the error number.
>
> I have also tried to create a Microsoft Loopback Adapter with the address
> 192.168.2.22, but I get the same errors in the Event Log.
>
> Does anyone know how to get around this?
>
> Olav
>


.



Relevant Pages

  • RE: OWA Replies
    ... Ensure Exchange SP2 is installed on the server. ... If Exchange 2003 SP2 is not installed on the server, ... IIS Lockdown and URLscan Configurations in an Exchange Environment ... visit the following Microsoft Web site: ...
    (microsoft.public.windows.server.sbs)
  • RE: OWA Replies
    ... Ensure Exchange SP2 is installed on the server. ... If Exchange 2003 SP2 is not installed on the server, ... IIS Lockdown and URLscan Configurations in an Exchange Environment ... visit the following Microsoft Web site: ...
    (microsoft.public.windows.server.sbs)
  • RE: RWW & Monitoring reports
    ... program on the server called " Device Lock". ... web site gets a 440 timeout error. ... IIS Metabase. ... Install it, run MBExplorer ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Web Workplace logon problem
    ... > PSS support to check out whether we're able to install another Project ... > Server and make it work with SBS. ... >>To restore IIS metabase, please follow these steps. ... >>>but I now believe the mistake I made was to extend the Default Web Site. ...
    (microsoft.public.windows.server.sbs)
  • How to setup a Web Site on the ISA Server 2004 machine?
    ... I would really like to install a Web Site on the ISA Server 2004 computer. ... Now I would like to add IIS to the box and setup a Web Site. ...
    (microsoft.public.isa.configuration)