RE: ISA 2004 Firewall Client and ActiveSync 4.2

What is the default gateway on the client machine? If it is set to the ISA
server internal IP then your client works as a secureNAT client and you're
still not bypassing ISA.

Remove the default gateway and try again.

--
Shijaz
MCSE:Security, CCNA
www.shijaz.com/isaserver


"Jim B" wrote:

Shijaz, thanks for the suggestions. Did the things suggested but still
receive the same error.

Any other suggestions?

Thanks.

Jim Boettger

"Shijaz" wrote:

Activesync error 0x85010016 occurs when:

An error response was received from the HTTP gateway.
- OR -
Synchronization failed due to an error on the server.
Verify that the gateway is available and try again.
The device is using a proxy server to connect to the Exchange Server. The
proxy server encountered an error.

[See: Activesync error codes
http://www.shijaz.com/exchange/activesync_errors.htm ]

Make sure the option to bypass proxy to access local addresses is disabled
on your browser. If the problem persists, you need to prevent requests from
being sent through the proxy while using Firewall Client. See
http://www.shijaz.com/isaserver/bypass_isa.htm
--
Shijaz
MCSE:Security, CCNA
www.shijaz.com/isaserver


"Jim B" wrote:

Trying to sync a Cingular 8125 with AS 4.2 and USB connection on a WIndows XP
SP 2 computer to an Exchange 2003 sp2 server. Receive error 85010016.
Have no problems wirelessly.

Narrowed the problem down to the ISA 2004 Firewall Client. If I uninstall
the FW client I have no problems syncing. Install it and syncing fails again.

Any thoughts on why the FW client would be blocking syncrhonization?

Thanks in advance for any insight.

Jim

.

Relevant Pages

  • RE: ISA 2004 Firewall Client and ActiveSync 4.2
    ... at home in my WLAN all internet ... that killing my default gateway is not the way ... gateway and the appropriate DNS server entries. ... server internal IP then your client works as a secureNAT client and you're ...
    (microsoft.public.isa.clients)
  • RE: sloww web browsing
    ... and ISA 2004, the internet access became slower than it used to be. ... Open the ISA Server management console, ... Click Start, point to Programs, point to Microsoft ISA server, and then ... will you be able to access the internet from the internal client ...
    (microsoft.public.windows.server.sbs)
  • RE: OWA page not displayed Outside
    ... Open ISA 2006 management console. ... Expand the server node and highlight 'Monitoring'. ... Click 'Configure Firewall Logging'. ... |> internal client as both the web proxy client and firewall client? ...
    (microsoft.public.windows.server.sbs)
  • RE: ISA/Client fail over
    ... ISA/Firewall client related at all. ... The default gateway is one of the IP configurations. ... This is not a configuration controlled by the ISA server. ... Firewall client does not support automatically failover. ...
    (microsoft.public.isa)
  • Re: ISA firewall block outgoing email.
    ... I cannot send/receive email to the POP3 account unless I turn off the firewall in the CEICW. ... (This server is behind a router so I felt the test was safe enough to turn off the firewall). ... As I said, there is no need to add a hole for port 110, If the ISA client is installed on the workstation, Outlook will deliver the email. ...
    (microsoft.public.windows.server.sbs)