Re: RIS auf dem ISA2004

Hallo Jens,

Also, was ich probiert habe, ist mal die Scheunentore aufzureißen und zwischen intern und local-Host alles freizuschalten. trotzdem verschluckt sich der TFTP gewaltig. Ich will nicht sagen, dass GAR NICHTS geht, aber mehr als ein paar Bit/s kommen wirklich nicht durch. Im Protokoll steht eine verweigerung auf Port 63594.
Genaueres schaue ich gerne nach. 


ich habe jeztzt noch eine offizielle Erklaerung gefunde:
http://www.microsoft.com/technet/prodtechnol/isa/2004/plan/unsupportedconfigs.mspx


Du meintest das da:
-----------
Colocating Remote Installation Services with ISA Server

Problem: When ISA Server 2004 is installed, Remote Installation Services (RIS) takes an extreme length of time to deploy an image.

Cause: If this only occurs for clients on a remote subnet, you may need to change a registry entry. RIS uses Trivial File Transfer Protocol (TFTP). ISA Server has a predefined protocol for TFTP. The predefined protocol has a secondary connection defined as all User Datagram Protocol (UDP) ports, but this will only work when Firewall Client is installed on the client computer.

Solution: Use the following workaround:
• Open the complete range of UDP ports from the client to the TFTP server.
• Open the complete range of UDP ports from the TFTP server to the client.
---------------
Trifft glaube ich nicht ganz das Problem.
Auch die Lösung ist nicht so ganz nach meinem Geschmack, wieso sollte ich _alle_ Ports aufmachen, wenn ein einziger ausreicht?

Martin
.

Relevant Pages

  • Re: network booting
    ... So the client would need to tell on which offset into on of the ... The client asks the server to open a specific file (by ... component of DOS 3.3, as well as RWTS. ... code on the C64 can send commands (using a serial protocol called IEC) ...
    (comp.sys.apple2)
  • Re: client -server interaction over XML supporting multiple protocols
    ... > NETBEUI to access the server to access the functionalities exposed. ... > server doesnot know in advance which client is using what protocol. ... size of the XML and Xfunctionality will determine the demands ...
    (comp.lang.cpp)
  • OpenSSH: SSH2 sshd - Increase key size from 2048 to 8192 bits (Cygwin)
    ... I am only using the SSH2 protocol. ... key, normally 768 bits, generated when the server starts. ... The client compares the RSA host key ... the server and the client enter an authentication ...
    (comp.security.ssh)
  • Authenticating authorised clients was Re: Helpful clients in client-server Nethack
    ... I don't see how an asymmetric cypher would help. ... that the client is approved by the organisers. ... CHAP, challenge handshake authentication protocol. ... The closed source clients and server know a passphrase. ...
    (rec.games.roguelike.nethack)
  • Re: Help a Noobie please with opening a port
    ... Unless the WARP client is making CERN proxy requests, ... 'Selected Protocols' and created a new protocol using Port range ... LocalHost or Internal (if on other server) ... Microsoft ISA Server Partners: Partner Hardware Solutions ...
    (microsoft.public.isaserver)