Re: VPN Outlook Router

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



Hallo

wollte nur kurz nochmal Danke sagen.

SBS funtioniert einwandfrei...!

DNS problem gelöst.
Zugriff auf SBS über Cisco habe ich durch DMZ geschaffen.
Active Server Sync mit SSL und Windows Mobile 5.0 ...geht auch.

NUR 2 kleine Fragen habe noch ...!!

1. Actice Sync Mobile 5.0 es werden E-Mail, Kontake, Kalender auf den Mobile
angezeigt aber leider fehlt der Eintrag AUFGABEN ?

2. Bei der E-Mail Sync er nicht alle sondern nur die letzten 5std obwohl
sync auf alle eingestellt ist ?

Ansonsten noch mal Danke für die tolle Hilfe ...

Gruß






"Tobias Redelberger (MVP - SBS)" wrote:

Hi Ule

Das ich ein Dns Problem habe, habe ich verstanden warum das so
eingerichtet wurde verstehe ich auch nicht.
Werde erst mal schauen das ich das hin bekomme.......

Fein.

Als Denkanstoss wäre folgender Artikel zu erwähnen, Stichwort: SPLIT DNS!:

You Need to Create a Split DNS!
http://www.isaserver.org/tutorials/You_Need_to_Create_a_Split_DNS.html

Auszug:
[..]
Conclusion

A split DNS infrastructure is something you should create whenever you use
the same domain name to host resources for both internal and external
network clients. You’ve got to do this if you want to optimize access for
your internal network clients to avoid is looping back through the external
interface of the ISA Server. The split DNS infrastructure prevents internal
network clients from looping back through the external interface of the ISA
Server and lets them connect directly to the publishing servers on the
internal network directly via the server’s private, internal network IP
address.
[..]

Wie ist das mit den Routern...wie gesagt der 1. Router gehört uns
nicht und die schalten den Port 443 nicht frei....da kann ich nichts
ändern...

Der zugriff besteht über VPN und tunnel zwischen 1. Router und 2.
Router auch ..Rechener sind dann auch erreichbar...

Und wo liegt nun noch Dein Problem?

Technisch is es nämlich irrelevant, was VOR Deinem SBS 2003 Server passiert,
sofern der Client Zugriff auf den Port 443 des SBS 2003 erhält
(genauer:https://<FQDN-Server>/RPC/*) und dieser mittels obiger Anleitung
konfiguriert wurde.


--
Tobias Redelberger
StarNET Services (HomeOffice)
Schoenbornstr. 57
D-97440 Werneck
Tel: +49 (9722) 4835
Mobil: +49 (179) 25 98 341
Email: T.Redelberger@xxxxxxxxxxxxxxxxxxxx



.



Relevant Pages

  • Re: SBS2003 - Cannot restore GPO following Article 888943
    ... As to the second DNS setting, the system worked quite well prior to ... forwarders on the SBS server DNS. ... >another installation of SBS 2003? ... >This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Go back to pointing the external NIC DNS Servers to the SBS server IP ... make sure the DHCP Client Service is running on the server. ... Next I Select a local router device with an ip address. ...
    (microsoft.public.windows.server.sbs)
  • Re: Internet Speed
    ... I think what we are trying to say is to use the DHCP from the SBS and NOT ... DNS and WINS point to the SBS. ... as the server IP address. ... it is recommend to configure all SBS client computers' IP and DNS ...
    (microsoft.public.windows.server.sbs)
  • Re: Help! w/ Upgrade-Installation problems with OMA/ActiveSync and
    ... Am I misinterpreting the summary doc from CEICW re: dhcp and dns settings ... under the SBS DNS forwarder tab. ... DNS server addresses I assume from the DSL modem. ...
    (microsoft.public.windows.server.sbs)
  • RE: ICW Problem Error 0x80072581 Deleting the DNS record external NIC
    ... Make sure your SBS internal and external network interface DNS is ... Do you have any site hosted in the SBS server other than the four ... Check if the PUBLISHING record in DNS is an A record. ... check to see if there is a name record 'publishing'. ...
    (microsoft.public.windows.server.sbs)