Re: line usage statistic

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Daniel Melanchthon [MVP] (melanchthon_at_gmx.de)
Date: 10/08/04 

Date: Fri, 08 Oct 2004 18:37:36 +0200

Robert Voigtländer schrieb:

> Transfervolumen kann der provider liefern, kein Problem. Zeitgenaue
> Auslastung aber nicht.
> Ich schaue mir gerade nochmal die counter an, irgendwie muss es damit ja
> gehen.

Was für einen Router hast Du denn an der Leitung? Wenn der SNMP
unterstützt, wäre Cricket oder MRTG eine Lösung für Dich. Alternativ
kann man auch den WAN-Port des SIA an einen managebaren Switch (z.B.
via kleinem VLAN) mit dem Anbindungsrouter verbinden und den Switch
via SNMP mit den gleichen Tools abfragen.

Oder Du schaust Dich mal hier um: http://snmpboy.msft.net/ 

-- 
Gruss aus dem Hoch im Norden!
Daniel Melanchthon - MVP Exchange Server
"Banging your head against a wall uses 150 calories an hour!"

Relevant Pages

  • Re: How do I get the port on a switch that a PC is connected to.
    ... With SNMP there are two distinct concepts. ... "the command tcpConnLocalPort" - you ... If the switch maintains this information, you are in luck and you can ... The advantage of this method is you can directly get the port of the ...
    (comp.protocols.snmp)
  • Re: How do I get the port on a switch that a PC is connected to.
    ... With SNMP there are two distinct concepts. ... If the switch maintains this information, you are in luck and you can ... the exact OID) or the GETNEXT command (does not require the exact ... The steps to get started with a MIB Walker are: ...
    (comp.protocols.snmp)
  • Re: Unused switch port report for 1/3 months
    ... If you get it running and have it monitor all of the switch ... ports, not just the ones up at initial running, then you can accumilate data ... MRTG has been around for a while and relies on SNMP for collecting data. ...
    (comp.dcom.sys.cisco)
  • Re: Measure amount of network usage
    ... netflow is adequate to this task. ... cheap, but should be other free options out there), it will use SNMP ... you to graph each switchport on the switch (you would need to resolve ... connected to - as i use (up to 200 ports per switch). ...
    (comp.dcom.sys.cisco)
  • Re: Measure amount of network usage
    ... netflow is adequate to this task. ... cheap, but should be other free options out there), it will use SNMP ... you to graph each switchport on the switch (you would need to resolve ... connected to - as i use (up to 200 ports per switch). ...
    (comp.dcom.sys.cisco)