Re: IPSec Paketfilter für Mailserver (MDaemon)

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Christoph Tuszynski (nobody_at_tuschi.de)
Date: 03/25/04 

Date: Thu, 25 Mar 2004 09:50:23 -0800

Hallo Markus,

"Markus Mühlich" <markus.muehlichnet@cologne.de> schrieb:
[DNS-Auflösung]
> werden. Somit sollte wohl klar sein, daß ich nicht Port 53 sondern
> einen anderen für eingehenden DNS Traffic auf UDP freigeben muß.

Traffic nach Port 53 TCP & UDP muss frei sein.

Grüße
Christoph 

-- 
Win2000-FAQ: http://w2k-faq.ebend.de
Euro-Echtheitsmerkmale: http://www.euro.ecb.int/de/section/recog.html
Was heißt die Abkürzung DLL? Die laß liegen!

Relevant Pages

  • Re: Block UDP Ports?
    ... I'm using Checkpoint Firewall-1. ... reasonable that Firewall-1 would leave UDP wide open. ... > UDP ICMP port unreachable scanning: This scanning method varies from the ...
    (comp.security.firewalls)
  • UDP DoS attack in Win2k via IKE
    ... This memo should clarify the issue discovered with the UDP DOS ... Sending of UDP traffic to port 500 UDP will cause windows to ... attacked host is an IPSec gateway). ...
    (Bugtraq)
  • Re: LDAP UDP Port Problem
    ... The correct fix is to identify that the network gear is tossing out the UDP ... Then I did some portqry's on the LDAP port ... > Sending LDAP query to TCP port 389... ...
    (microsoft.public.windows.server.networking)
  • Re: Block UDP Ports?
    ... UDP scanning is questionable to many - if the port is open, ... closed ports aren't even required to send an error packet. ...
    (comp.security.firewalls)
  • Re: LDAP UDP Port Problem
    ... The correct fix is to identify that the network gear is tossing out the UDP ... Then I did some portqry's on the LDAP port ... > Sending LDAP query to TCP port 389... ...
    (microsoft.public.windows.server.setup)