Re: Vista & Raid-Systeme?




Hallo!

Susan Seitz schrieb:

wißt Ihr bzw. habt Ihr Erfahrung, ob es bezüglich

- des Bootvorgangs (Cold-Startup)

- im "Normalbetrieb"

...unter Vista bei modernen PCs (Doppelkerne, 4 GB RAM, 512 MB Grafik
etc.) etwas bringt (also etwa Geschwindigkeitsvorteile etc.), wenn man
statt einer großen 7200 rpm Festplatte ein RAID-System mit 2 HDDs (im
schnellen Mirrorbetrieb?) betreibt...?

Was denn jetzt?
Mirror oder Schnell, du musst dich schon entscheiden :-)

Wenn Du von einem RAID 0 redest gehe ich davon aus das Du beim
Systemstart und Start von Anwendungen vielleicht Messbare aber kaum
fühlbar schneller Ergebnisse erlangst.

Da dazu auf viele "kleine" Dateien zugegriffen werden muss hast Du nach
wie vor die Zugriffszeiten die beim RAID 0 nicht weniger werden.
Den Vorteil der größeren Transferrate spürst Du deutlich wenn Du zB.
viel mit großen Multimedia-(Roh)Dateien (WAV, DV etc.) arbeitest.

Um genauer Auskunft geben zu können musst Du schon ein paar mehr Details
zu deinem Anwendungspektrum liefern. Dazu wäre auch von Interesse ob Du
den internen Controller eines Mainboards oder einen zusätzlichen
Controller ins Auge fassen würdest.

Da das aber auch kein VISTA spezifisches "Problem" ist möchte ich dich
bitten weitere Fragen in der passenden Gruppe zu stellen.

FollowUp nach de.comp.hardware.laufwerke.festplatten gesetzt

Gruß
René

.



Relevant Pages

  • Re: Adaptec 1210SA problem (with installation) [SOLVED]
    ... 1210SA don't support native raid, its implemented with driver and with software raid under linux. ... I configured the controller to make a hardware mirror raid, but when install FC5 it detect my primary IDE harddisk and the 2 harddisk in the 1210sa controller. ...
    (Fedora)
  • Re: PowerEdge 1800 Spontaneous Reboots
    ... Gregory Orton: SBS Admin wrote: ... 160GB SATA non RAID setup back into a RAID 1 mirror? ... simple as plugging them both in, and telling the raid controller to ...
    (microsoft.public.windows.server.sbs)
  • SATA and RIAD 1
    ... I'm wondering if you actually have a hardware raid ... if you have a hardware raid controller. ... two SATA WD 74GB drives that I wanted to mirror in RAID 1. ...
    (microsoft.public.windows.server.sbs)
  • Re: Migrating to RAID 1
    ... you would not have to use an image to install the finished product onto the new RAID if you had introduced the driver first. ... yes it is a SATA RAID Controller, ... Once the driver is installed and the card is recognized by Windows, you should be able to add the SATA or SAS drives and mirror them according to the mfg instructions, then image your system drive to the RAID attached to the controller. ...
    (microsoft.public.windows.server.sbs)
  • Re: bad blocks on raid5 cause filesystem failure
    ... It is setup in in RAID 5. ... How could a RAID controller botch this up? ... should be rebuilt on spare drive if available from remaining drives. ... All is fine unless you have double fault. ...
    (comp.os.linux.hardware)

Quantcast