Re: Images and Hyperlink problems after Publish Site
From: Eric G (someone_at_microsofty.com)
Date: 06/23/04
- Next message: RebeccaAP: "Re: "Please enter value""
- Previous message: Mark Fitzpatrick: "Re: Starting with ASP"
- In reply to: Stefan B Rusynko: "Re: Images and Hyperlink problems after Publish Site"
- Next in thread: Stefan B Rusynko: "Re: Images and Hyperlink problems after Publish Site"
- Reply: Stefan B Rusynko: "Re: Images and Hyperlink problems after Publish Site"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 23 Jun 2004 14:20:48 +0200
Stefan,
Well, very strange, I have never previously had any problem whatsoever to
see any images of any kind. On our own site, I can see the pictures on the
particular page, as well as on all other oictures without problem. I've
also now compared the IE6 setup on this other system I just used and it's
IE6 setup is identical to my own (that is, default settings in the
IE6/Internet options/Advanced tab) inclusive the Multimedia Option/Show
Pictures that is ticked.
I've also, as I mentioned before, tested both with and without the firewall,
but i doesn't make any difference, and theretoo, the other system is also
using the same firewall, and there the pictures come up teh way they should.
And why would the IE6/View/Source, not show the correct code? The would not
have anything to do with the picture being shown, or ...
Just wondering if you, or anybody else, experienced this problem?
Once again - many thanks!
Best regards,
Eric Green
Stockholm, Sweden
"Stefan B Rusynko" <sbr_enjoy@hotmail.com> wrote in message
news:eJ24ybRWEHA.1380@TK2MSFTNGP09.phx.gbl...
> In IE Tools Internet Options Advanced - Media (turn on images)
>
> --
>
> _____________________________________________
> SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> "Warning - Using the F1 Key will not break anything!" (-;
> To find the best Newsgroup for FrontPage support see:
> http://www.net-sites.com/sitebuilder/newsgroups.asp
> _____________________________________________
>
>
> "Eric G @intermarine.se>" <eg1<remove/this> wrote in message
news:OC4jBWRWEHA.2576@TK2MSFTNGP10.phx.gbl...
> | Stefan,
> |
> | It's not that I'm a little embarrased, I'm greatly embarrased!
> |
> | I just started up another computer and logged on to our site, and then,
to
> | my amazement, the images and the hyperlinks are there! When I look at
the
> | source, via View/Source, on this other system, I can also see the full
code
> | as it should appear.
> |
> | But, what on earth is then wrong with my own developmentt system, since
> | everything else works perfectly? I switched off my firewall on my
> | development system as I though it had something to do with this, but no,
the
> | same phenomena - no images! Is there some configuration issue with IE6?
Do
> | you have any idea (just asking)?
> |
> | To ask someone for help, was my last way out, I've tried to solve this
> | problem for over a week now, to no avail!
> |
> | I'm most grateful for your help - thank you.
> |
> | Best regards,
> |
> |
> | Eric Green
> |
> |
> | "Stefan B Rusynko" <sbr_enjoy@hotmail.com> wrote in message
> | news:#bO69KRWEHA.3420@TK2MSFTNGP12.phx.gbl...
> | > But I am looking at your Published site online - view source
> | > - and the code (as I posted it) and images/links are OK and the same
as
> | you posted under CODE FROM FRONTPAGE 2003 LOCAL SITE.
> | >
> | >
> | > --
> | >
> | > _____________________________________________
> | > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> | > "Warning - Using the F1 Key will not break anything!" (-;
> | > To find the best Newsgroup for FrontPage support see:
> | > http://www.net-sites.com/sitebuilder/newsgroups.asp
> | > _____________________________________________
> | >
> | >
> | > "Eric G @intermarine.se>" <eg1<remove/this> wrote in message
> | news:eNEwB9QWEHA.1952@TK2MSFTNGP12.phx.gbl...
> | > | Hi Stefan,
> | > |
> | > | Many thanks for taking the time to reply.
> | > |
> | > | Let me clarify. When I create the FP site on my local computer,
adding
> | the
> | > | table, the images and the hyperlinks to the images, everything works
> | fine,
> | > | and in code view, it looks just like in my included example CODE
FROM
> | > | FRONTPAGE 2003 LOCAL SITE.
> | > |
> | > | However, after I publish the site, the code for the page looks like
in
> | my
> | > | second example CODE FROM FRONTPAGE 2003 PUBLISHED SITE, i.e. the
> | references
> | > | to the images have disappeared, as you can see. And that's my
problem,
> | why
> | > | does the code change?
> | > |
> | > | As a test, I removed the table, with content and all, inserted a new
> | table
> | > | and added images to the cells, but without adding any hyperlinks -
then
> | all
> | > | images show up on the published site. As soon as I add hyperlinks
the
> | images
> | > | disappear, why it must have something with the hyperlinks to do. But
> | what?
> | > |
> | > | I was thinking, could it be that the published page look differently
> | > | displayed in another resolution? I changed the resolution on my
system
> | and
> | > | had a look again, but still no images. And, obviously, the code can
not
> | > | change whatever resolution one is using watching the page.
> | > |
> | > | Best regards
> | > |
> | > | Eric Green
> | > |
> | > | Stockholm Sweden
> | > |
> | > |
> | > |
> | > | "Stefan B Rusynko" <sbr_enjoy@hotmail.com> wrote in message
> | > | news:uo4TLfQWEHA.3740@TK2MSFTNGP12.phx.gbl...
> | > | > Don't understand
> | > | > I see the 3 images and links on your published page and the code
is
> | > | unchanged as
> | > | >
> | > | > <table border="0" id="table3"><tr>
> | > | > <td><a target="_blank" href="http://www.ancorproducts.com">
> | > | > <img border="0" src="../images/product_images/ancor-logo.jpg"
> | > | width="100" height="43"></a></td>
> | > | > <td><a target="_blank" href="http://www.atwbrand.com">
> | > | > <img border="0" src="../images/product_images/atw.jpg"
width="90"
> | > | height="50"></a></td>
> | > | > <td><a target="_blank" href="http://www.bluesea.com">
> | > | > <img border="0" src="../images/product_images/bluesea.jpg"
> | width="100"
> | > | height="30"></a></td>
> | > | >
</tr><tr><td> </td><td> </td><td> </td></tr></table>
> | > | >
> | > | > --
> | > | >
> | > | > _____________________________________________
> | > | > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
> | > | > "Warning - Using the F1 Key will not break anything!" (-;
> | > | > To find the best Newsgroup for FrontPage support see:
> | > | > http://www.net-sites.com/sitebuilder/newsgroups.asp
> | > | > _____________________________________________
> | > | >
> | > | >
> | > | > "Eric G @intermarine.se>" <eg1<remove/this> wrote in message
> | > | news:OoAdqwPWEHA.212@TK2MSFTNGP11.phx.gbl...
> | > | >
> | > | >
> | > | >
> | > | >
> | > | >
> | > | >
> | > | > Hello,
> | > | >
> | > | >
> | > | >
> | > | > FrontPage 2003
> | > | >
> | > | >
> | > | >
> | > | > I've got a problem with tables containing images and hyperlinks
and
> | the
> | > | difference in result between my local development site and
> | > | > the published result.
> | > | >
> | > | >
> | > | >
> | > | > I create a table, 3 x1 (the number of columns or rows doesn't
really
> | > | matter). I each of the cells I place a jpg image, specify the
> | > | > address in the hyperlink properties, and specify the target to be
New
> | > | window (_blank). On my local system in both FrontPage preview
> | > | > and an IE6 preview, it all looks fine and the hyperlinks work ok.
> | After
> | > | publishing the site to a host running FPSE, sometimes a get
> | > | > what looks like the shade on ONE of the table cells, but most
often I
> | just
> | > | get a blank space.
> | > | >
> | > | >
> | > | >
> | > | > If I recreate the table, add the images to the cells (without
adding
> | > | hyperlinks), all images are displayed correctly. But, again, as
> | > | > soon as I add the hyperlinks and republish, the images are no
longer
> | > | displayed.
> | > | >
> | > | >
> | > | >
> | > | > I've let FrontPage publishing function "overwrite" the destination
> | files
> | > | each time at publish, and I have even deleted the complete
> | > | > published site several times and republished my data. I've tried
the
> | > | Recalculate hyperlinks command without success. There are no
> | > | > spaces in any folders or file names. On top of it all, I've read
> | FrontPage
> | > | 2003 Inside Out, by Jim Buyens, cover to cover (and have
> | > | > it on my desk), but not found any reference to this behavior. Is
it
> | me, or
> | > | have I missed something?
> | > | >
> | > | >
> | > | >
> | > | > Can you please let me know, why this happens and what to do to
correct
> | > | this problem?
> | > | >
> | > | > I would be most grateful for any suggestion.
> | > | >
> | > | >
> | > | >
> | > | > Eric G
> | > | >
> | > | > Stockholm, Sweden
> | > | >
> | > | >
> | > | >
> | > | > Site: http://www.intermarine.se/en/yacht_equipment_en.htm
> | > | >
> | > | >
> | > | >
> | > | > Samples:
> | > | >
> | > | >
> | > | >
> | > | >
> | > | >
> | > | > CODE FROM FRONTPAGE 2003 LOCAL SITE
> | > | >
> | > | >
> | > | >
> | > | > <table border="0" id="table3">
> | > | >
> | > | > <tr>
> | > | >
> | > | > <td><a target="_blank" href="http://www.ancorproducts.com">
> | > | >
> | > | > <img border="0" src="../images/product_images/ancor-logo.jpg"
> | width="100"
> | > | height="43"></a></td>
> | > | >
> | > | > <td><a target="_blank" href="http://www.atwbrand.com">
> | > | >
> | > | > <img border="0" src="../images/product_images/atw.jpg" width="90"
> | > | height="50"></a></td>
> | > | >
> | > | > <td><a target="_blank" href="http://www.bluesea.com">
> | > | >
> | > | > <img border="0" src="../images/product_images/bluesea.jpg"
width="100"
> | > | height="30"></a></td>
> | > | >
> | > | > </tr>
> | > | >
> | > | > <tr>
> | > | >
> | > | > <td> </td>
> | > | >
> | > | > <td> </td>
> | > | >
> | > | > <td> </td>
> | > | >
> | > | > </tr>
> | > | >
> | > | > </table>
> | > | >
> | > | >
> | > | >
> | > | >
> | > | >
> | > | > CODE FROM FRONTPAGE 2003 PUBLISHED SITE
> | > | >
> | > | >
> | > | >
> | > | > <table border="0" id="table3">
> | > | >
> | > | > <tr>
> | > | >
> | > | > <td><a target="_blank" href="http://www.ancorproducts.com">
> | > | >
> | > | > </a></td>
> | > | >
> | > | > <td><a target="_blank" href="http://www.atwbrand.com">
> | > | >
> | > | > </a></td>
> | > | >
> | > | > <td><a target="_blank" href="http://www.bluesea.com">
> | > | >
> | > | > </a></td>
> | > | >
> | > | > </tr>
> | > | >
> | > | > <tr>
> | > | >
> | > | > <td> </td>
> | > | >
> | > | > </tr>
> | > | >
> | > | > </table>
> | > | >
> | > | >
> | > |
> | > |
> | >
> | >
> |
> |
>
>
- Next message: RebeccaAP: "Re: "Please enter value""
- Previous message: Mark Fitzpatrick: "Re: Starting with ASP"
- In reply to: Stefan B Rusynko: "Re: Images and Hyperlink problems after Publish Site"
- Next in thread: Stefan B Rusynko: "Re: Images and Hyperlink problems after Publish Site"
- Reply: Stefan B Rusynko: "Re: Images and Hyperlink problems after Publish Site"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
