Re: Unable to telnet into port 25

Hi,

The router must be configured to forward port 25 to the exchange server - is that configuration made?

Leif

"Admin Matt" <Admin.Matthew@xxxxxxxxx> skrev i meddelelsen news:dc9c9132-cf24-4361-bcfb-05ad10b65b5a@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi, we setup a new Windows 2003 Server / Exchange Server 2003 and are
unable to telnet into port 25 from outside of our network. We made
sure there were no firewalls being used (ISA, Windows Firewall and
etc). We also talked to our ISP and they said they are not blocking
port 25 traffic. They also said the router they installed, which they
won't give us access too, is not set to block any port 25 traffic. Any
ideas here? We need to get this to work so people can use Outlook
Express from outside of the network to send e-mails using this server.
Thanks in advance.

.

Relevant Pages

  • Spurious completions during NCQ
    ... support DPO or FUA ... ACPI: PM-Timer IO Port: 0x408 ... Using ACPI for SMP configuration information ...
    (Linux-Kernel)
  • Re: Cisco 760
    ... On the ports you are unsure about below, where it says Router, does it ... I can't think why the router requires Port 80 to allow Port 443 other than a ... Current Configuration ... PAT Multicast Summarization Netbios Spoofing/Left ...
    (microsoft.public.windows.server.sbs)
  • Re: Cisco 1720 Question
    ... here is their current run configuration. ... hostname Router ... >> networks, wants to setup a VPN into their server on port 5000. ...
    (comp.dcom.sys.cisco)
  • Re: General Router Question(s)
    ... >> A WIRELESS INTERNET router will provide a wired port for connecting ... >> not allow access to the configuration pages over this port, ... > That depends on the router. ...
    (alt.os.linux.suse)
  • Re: Question about LANWAN Ethernet connector (DSL modem)
    ... The DSL modem was installed by my rural phone company, ... In reference to the back panel connectors, it says "1 LAN port can be ... If the router was supplied by your ISP, ... No configuration needed by me, it must have used any default ...
    (comp.sys.mac.comm)