Sending email problem

I'm trying to setup Exchange 2003 in the following environment:

1 Access Internet email sitting on ISP server
2 Send email via pop connector
3 route internal email

So far, pop connector works fine and Internal emal work OK. However, when
using E-mail & Internet Connection Wizard, I get an error and the end of the
wizard.

In the setup steps I choose the following:

1 Enable Internet e-mail
2 Forward all e-mail to server at your ISP
I use the SMTP server address provide by my ISP (which is the same
one I have been using in Outlook for years)
3 E-mail Retrieval Method (Use the MS Connector for POP3 Mailboxes)
4 E-mail domain name (Blank)
5 Added POP3 Mailbox Accounts

When I click "Finish", I get an error message and then select OK. On the
Wizard window, all of the steps get a check mark except "E-mail
Configuration".

Please note that I can ping the ISP's SMTP server but not telnet to it. If
I try to telnet, I get a "could not open connection to host on port 23:
Connect failed" message. Any guidance available?



.

Relevant Pages

  • RE: Exchange Issues
    ... The problem occuring was that SPA had been ticked in the POP3 connector ... > Email and Internet Connection Wizard) first. ... > email settings of the server. ... If you need to forward internet email to your ISP ...
    (microsoft.public.windows.server.sbs)
  • Re: Why IP address is fixed everytime connected to the Internet?
    ... The ISP, the network card (i.e. MAC address??), or the ... Typically it is assigned by your ISP. ... from the ISP DHCP server. ... Some Internet connections are formed using PPP ...
    (comp.os.linux.networking)
  • Re: Why IP address is fixed everytime connected to the Internet?
    ... The ISP, the network card (i.e. MAC address??), or the ... Typically it is assigned by your ISP. ... from the ISP DHCP server. ... Some Internet connections are formed using PPP ...
    (microsoft.public.security)
  • Re: How do I get default service change to stay
    ... PITA - this is anti server behaviour by your ISP. ... If their ISP did not have these security> requirements, I would be using the POP connector to retrieve email and the ... > My only problem has been that if the ISP service in the Outlook profile is> not the default account, outbound Internet email is sent to the Exchange> server, not to the ISP mail server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Exchange 2007 Send Connector problem with Internal email address
    ... Please note that "JACO.COM" is our mail domain name (MX record is still pointing to the Exchange 2003 server) and host 66.162.xxx.xxx is in fact the new Exchange 2007 server ... Please do not send email directly to this alias. ... setup a Receive Connector with appropriate permissions. ... I can send email out of all internet email addresses with the send connector ...
    (microsoft.public.exchange.setup)