Re: Exchange 2003 Web interface and tailoring it...

From: Mark Arnold [MVP] (mark_at_mvps.org)
Date: 11/22/04


Date: Mon, 22 Nov 2004 19:50:41 +0000

On Sun, 21 Nov 2004 21:39:02 -0800, "David Lazer"
<DavidLazer@discussions.microsoft.com> wrote:

>Has anyone changed or tailored the interface to Exchange 2003's Web
>interface? If so, can you share what precautions/files all have to be
>changed? We'd like to add our own logo upon logging in to the web interface
>of Outlook 2003. Can this be done? Thank you in advance.
>
>David

The logon.asp file is pretty easy to change, assuming you know your
way around a bit of asp. I even managed to put my logo on my home lab,
despite being no code monkey.



Relevant Pages

  • Re: cant ping or telnet to or from a cat 3550
    ... Logging is enabled but shows nothing at all other than a couple ... Interface FastEthernet0/18, changed state to down ... I am trying to ping from a host on Vlan 9, ... from the switch which also does not work. ...
    (comp.dcom.sys.cisco)
  • Setting up a PIX 501 from scratch
    ... fixup protocol http 80 ... !--- Enable logging. ... !--- on the inside interface. ... access-group 100 in interface outside ...
    (comp.dcom.sys.cisco)
  • Basic pix configuration
    ... the inside interface is 10.10.10.250 ... fixup protocol http 80 ... access-list acl-in permit tcp host 10.10.10.50 any eq www ... no logging timestamp ...
    (comp.security.firewalls)
  • Re: Cisco 1721 Dropping Connection
    ... Ethernet interface ... input packets with dribble condition detected ... output buffer failures, ... route>show logging ...
    (comp.dcom.sys.cisco)
  • Re: Basic pix configuration
    ... >>the outside interface is 10.10.20.250 ... >>> fixup protocol http 80 ... >>> access-list acl-in permit tcp host 10.10.10.50 any eq www ... >>> no logging timestamp ...
    (comp.security.firewalls)