Re: Error 1722 Event ID 9322

From: Steve Antonio [MSFT] (steveant_at_online.microsoft.com)
Date: 02/10/04 

Date: Tue, 10 Feb 2004 14:55:26 -0500

OK, so it truly sounds like an RPC failure in the underlying network.
To verify, see if you can open the event viewer of one server from the other
(and vice versa). There could also be a problem creating a secure connection
between the two servers.

Also, you could check to be sure that each server has the right RPC endpoint
mappers (Exchange wise) with this article:

310298 How to Use Portqry.exe to Troubleshoot Microsoft Exchange Server
http://support.microsoft.com/?id=310298 

-- 
Cheers,
Steve Antonio
Microsoft Exchange Support
This posting is provided "AS IS" with no warranties, and confers no rights.
Note: Please do not reply to this e-mail address. It is used for newsgroup
purposes only.
"Jim" <Jim.Hammar@intec.us> wrote in message
news:e39c01c3f008$492fa650$a601280a@phx.gbl...
> Added host entry
> Can ping by FQDN to both servers.
> Also RPing fails on both servers
>
>
> >-----Original Message-----
> >This is most likely a DNS related issue. With SP4, we
> depend more on DNS
> >than WINS resolution.
> >
> >You mention you can ping by name, is that NetBIOS name or
> FQDN (i.e.
> >server.domain.com)?
> >
> >Try adding an entry in the host file with the FQDN of the
> destination server
> >(try this on both servers).
> >
> >279537 XCON: Post-Service Pack 3 MTA Bindback String
> Changes
> >http://support.microsoft.com/?id=279537
> >
> >-- 
> >Cheers,
> >
> >Steve Antonio
> >Microsoft Exchange Support
> >
> >This posting is provided "AS IS" with no warranties, and
> confers no rights.
> >
> >Note: Please do not reply to this e-mail address. It is
> used for newsgroup
> >purposes only.
> >
> >
> >"Jim" <Jim.Hammar@intec.us> wrote in message
> >news:dd7101c3eff7$febdfb90$a001280a@phx.gbl...
> >> BTB - It's  a w2k box with Exchagne 5.5 connecting to
> >> another w2k box with 5.5 both SP4
> >> >-----Original Message-----
> >> >Can anyone give me guidance on this error beyond what
> is
> >> >in Technet.
> >> >I can ping by name. I can Net view. I can Net use. I
> have
> >> >added a record to both DNS and LMHost file. I have
> >> >rebooted till I feel like a cowboy. I have reloaded the
> >> OS.
> >> >I have changed NIC cards. Any help greatly appreciated.
> >> >
> >> >An interface error has occurred. An MtaBindBack over
> RPC
> >> >has failed. Locality Table (LTAB) index: 4, NT/MTA
> error
> >> >code: 1722. Comms error 1722, Bind error 0,
> >> > Remote Server Name INTECDALEX1, Protocol String
> >> >ncacn_ip_tcp:intecdalex1.chasdal[1047] [BASE IL
> INCOMING
> >> >RPC 41 507] (14)
> >> >.
> >> >
> >
> >
> >
> >.
> >

Relevant Pages

  • Re: Active Directory Replication Problem...
    ... Better you can use a forwarder on the DNS server properties in the DNS management console. ... So you have internally all clients using the internal DNS servers and the server 4 is the only DNS forwarding to the internet over your Broadband connection default gateway. ... The RPC server is unavailable. ... The last success occurred at 2008-05-03 14:43.11. ...
    (microsoft.public.win2000.active_directory)
  • Re: Forest Root DC Single Label host name
    ... Connecting to directory service on server directory. ... Check the DNS server, DHCP, server name, etc ... Last attempt @ 2008-03-03 11:52.23 was successful. ... Default-First-Site-Name\DIRECTORY via RPC ...
    (microsoft.public.win2000.active_directory)
  • Re: RPC Traffic causing Domain Controller Synchronization issues
    ... Except for the server in SiteB that isn't ... primary DNS server. ... What action am I performing when RPC fails? ...
    (microsoft.public.windows.server.active_directory)
  • Re: Active directory replication problems
    ... included with the RPC server is unavailable. ... To get DNS out of the picture I would do the following ... I would first point the W2K DC to the W2K3 SBS server for primary DNS. ... Active Directory Replication over Firewalls ...
    (microsoft.public.windows.server.active_directory)
  • CD drive not supported under kernel 2.6? (repost and update)
    ... the ATA drives are SCSI and is having problems with the CD drive there. ... USB Universal Host Controller Interface driver v2.2 ... RPC: call_verify: program 100021, version 4 unsupported by server ...
    (comp.os.linux.setup)