Re: ActiveSync warning

Hi,

Thank you for posting back.

I understand that you encounter an error while using the Binding Cleanup
tool. Since this tool is not supported in this newsgroup, I suggest you
post your question on the Microsoft public tools newsgroups where other
folks may have already experienced this issue. You can find these
newsgroups by connecting you news reader to Publicnews.Microsoft.com.

Microsoft.Public.Exchange.Tool

Also you can try the following steps depend on my experience.
======
- Open Internet Explorer.
- Click File-> Open.
- Please select the "Open as Web Folder" check box.
- Type
http://servername/exchange/username/NON_IPM_SUBTREE/Microsoft-Server-ActiveS
ync and then click OK.
- Open the PocketPC folder.
- Delete the 'DeviceID' folder.
- Try to run Server Activesync again.


Hope this helps, if you have any other concerns on this issue, please feel
free to let me know.

Have a nice day!

Best Regards,

Chace Zhang (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on Exchange technical issues. If you have
issues regarding other Microsoft products, you'd better post in the
corresponding newsgroups so that they can be resolved in an efficient and
timely manner. You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: <davidhc25@xxxxxxxxxxxxxxxx>
| References: <ut#Zg7b1GHA.2176@xxxxxxxxxxxxxxxxxxxx>
<QpnRyRh1GHA.4280@xxxxxxxxxxxxxxxxxxxxx>
| Subject: Re: ActiveSync warning
| Date: Fri, 15 Sep 2006 10:13:26 -0400
| Lines: 197
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2962
| X-RFC2646: Format=Flowed; Original
| X-Antivirus: avast! (VPS 0637-1, 09/13/2006), Outbound message
| X-Antivirus-Status: Clean
| Message-ID: <eZKufEN2GHA.1268@xxxxxxxxxxxxxxxxxxxx>
| Newsgroups: microsoft.public.exchange.clients
| NNTP-Posting-Host: 167.21.225.162
| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP02.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.exchange.clients:97094
| X-Tomcat-NG: microsoft.public.exchange.clients
|
| Thanks for the very complete answer. It is possible that I wasn't very
clear
| with my original question.
| AUTD is working in our enterprise. What is more, I have the same device
| (treo 700w with Verizon) and it works perfectly for me.
| I know also quite well how it works since I spent 2 weeks readying
| information on ActiveSync when we starting using the devices 2 years ago
| (with Compaq iPaq)
| I did a little more digging and the phone number that it shows is from a
| previous device that the user had and it is no longer working ( the
screen
| is broken)
| So, in short the binding is wrong on the exchange server.
| Last night I found a tool that is probably what I need
(BindingCleanup.exe)
| called AUTD Binding Cleanup Tool.
| When I said probably is because I get an error when I try to run the tool
| Search AUTD Binding Error for: davidh
| The remote server returned an error: (403) Forbidden.
| DAV Protocol Error: The remote server returned an error: (403) Forbidden.
| If I had to take a wild guess I would say that is a problem with
| permissions, so this is what I have tried.
| Run the tool from my workstation and from the server.
| I have run it with my local account and with my domain administrator
account
| (we don't use administrator account, but instead we have our own account
| with the domain administrator rights for auditing pourposes).
| I have entered in the account to connect the Domain administrator
account,
| as well as the user account. Both get the same error.
| I also run the exchange best practices analyzer. When I am at the setting
to
| "Connect to Active Directory" at the domain I have to put our pre-2000
| domain name. We migrated from NT4 and Exchange 5.5 in June 2004, and with
| the migration came a new domain name (the new one is FQDN, the old one is
| not).
| Right now I found another road block, but I still want to remove that
| binding so I don't see that event log entry anymore.
|
| "chace zhang" <v-chacez@xxxxxxxxxxxxx> wrote in message
| news:QpnRyRh1GHA.4280@xxxxxxxxxxxxxxxxxxxxxxxx
| > Hi,
| >
| > Thank you posting here.
| >
| > According to your description, I understand you encountered following
| > error
| > event in Application log:
| >
| > Event Type: Warning
| > Event Source: MSExchangeActiveSyncNotify
| > Event Category: OMA Push Categorizer
| > Event ID: 10314
| > Date: 9/11/2006
| > Time:
| > User: N/A
| > Computer: ATHENS
| > Description:
| > The Exchange ActiveSync
| > user 'email address' has specified an invalid SMTP device address
| > '0409660990' on their device. The user will not be able to receive
| > up-to-date notifications on their device until the correct SMTP address
is
| > entered on their device. To fix this problem, tell the user to enter the
| > correct SMTP address on the device and then synchronize the device with
| > their Exchange server using ActiveSync.
| >
| > But you have type the correct SMTP address in the specific mobile
device.
| > Is it correct? If I'm off based, please feel free to let me know.
| >
| > Technical speaking, Always-up-to-date Notifications is a new feature in
| > Exchange 2003 that permits an always up-to-date user experience with
| > Pocket
| > PC. When an event is generated in a user's Exchange account, i.e. a new
| > email comes in, a notification is sent to the user's device by SMS. The
| > warning MSExchangeActiveSyncNotify 10314 indicates that there is an
| > incorrect SMTP address configured in mobile device, which prevents the
| > Always-Up-To-Date (AUTD) feature in Exchange server to send message to
the
| > mailbox of your mobile provider. Therefore, if you do use the Server
| > ActiveSync feature in your Exchange 2003 Server to sync data between
your
| > Exchange mailbox and your mobile device (pocket pc), you may have to
| > correct the SMTP address in your mobile device.
| >
| > NOTE: You may need to contact your mobile provider to register the AUTD
| > feature in their mail server. If your mobile service provider offers
such
| > function, you should input correct Device Email Address in the
SmartPhone,
| > normally, it is phonenumber@MOBILEISP. However, the user typed IP or
| > public
| > FQDN (may be the IP address of your Exchange Server) on his device that
| > resulted the issue. You can check device to confirm my assumption.
| >
| > If the mobile service provider did not provide Always-up-to-date
| > Notifications service, you can simply disable such feature on the user
| > account to remove the warning message:
| >
| > - Open Active Directory Users and Computers.
| > - Right click the problematic user account and click properties.
| > - Click Exchange Features tab.
| > - Highlight Up-to-date Notifications and then click Disable.
| >
| > In addition, Always-up-to-date Notifications only sends a message to
your
| > mobile ISP, it does not impact mail flow so you can send/receive emails
| > without a problem.
| >
| >
| > Hope this helps, if you have any other questions on this issue, please
| > feel
| > free to let me know.
| >
| > Have a nice day!
| >
| >
| > Best Regards,
| >
| > Chace Zhang (MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on Exchange technical issues. If you have
| > issues regarding other Microsoft products, you'd better post in the
| > corresponding newsgroups so that they can be resolved in an efficient
and
| > timely manner. You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
| > the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
| > doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| >
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| >
| >
| > --------------------
| > | From: <davidhc25@xxxxxxxxxxxxxxxx>
| > | Subject: ActiveSync warning
| > | Date: Mon, 11 Sep 2006 12:25:29 -0400
| > | Lines: 23
| > | X-Priority: 3
| > | X-MSMail-Priority: Normal
| > | X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2962
| > | X-RFC2646: Format=Flowed; Original
| > | X-Antivirus: avast! (VPS 0637-0, 09/11/2006), Outbound message
| > | X-Antivirus-Status: Clean
| > | Message-ID: <ut#Zg7b1GHA.2176@xxxxxxxxxxxxxxxxxxxx>
| > | Newsgroups: microsoft.public.exchange.clients
| > | NNTP-Posting-Host: 167.21.225.162
| > | Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP04.phx.gbl
| > | Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.exchange.clients:97062
| > | X-Tomcat-NG: microsoft.public.exchange.clients
| > |
| > | We have a user that tried to use in his pocket pc "Notify of new
email
| > as
| > | they arrive" in his schedule. We could never get it to work properly,
| > and
| > | even on the few devices that it worked, it was slower than having it
to
| > sync
| > | every 5 minutes.
| > | Our problem now is that even we changed the schedule in his device
(treo
| > | 700w) we still get this message logged in the exchange
| > | App: W 'Mon Sep 11 11:34:37 2006': MSExchangeActiveSyncNotify - " The
| > | Exchange ActiveSync user (email address removed)
| > | has specified an invalid SMTP device address '(phone number removed)
on
| > | their device. The user will not be able
| > | to receive up-to-date notifications on their device until the correct
| > SMTP
| > | address is entered on their
| > | device. To fix this problem, tell the user to enter the correct SMTP
| > address
| > | on the device and then synchronize
| > | the device with their Exchange server using ActiveSync. "
| > | I removed the email address and tel number, but basically that is the
| > | message. I look it up, but I cannot change the setting in the ppc
since
| > it
| > | already has the smtp address entered. I would like to remove Exchange
| > part
| > | that is trying to use the up-to-date notification. I could not find
any
| > | setting on the exchange server, not anything usefull while searching
the
| > | Internet
| > |
| > |
| > |
| >
|
|
|

.

Relevant Pages

  • RE: Catchall not working, EXTERNALLY?
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... to the exchange anymore. ... but we will start using the exchange server fully ...
    (microsoft.public.windows.server.sbs)
  • RE: Catchall not working, EXTERNALLY?
    ... In the Microsoft Exchange Server box, type the local name of the ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • Re: ActiveSync warning
    ... of an Exchange mailbox store on the same computer as the ... However, in Exchange Server 2003, you can use the Recovery Storage Group ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.exchange.clients)
  • Re: WM5 can not sync to exchange
    ... On the SBS 2003 Server open the Server Management console. ... Specify the NetBIOS name of Exchange Server in order to avoid PPC ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: OWA Authentication ? Domain/Name
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... Exchange 2003 SP1 replaces the OWA logon screen (Program ...
    (microsoft.public.windows.server.sbs)
Loading