Re: Stumped

Thanks for your comment Dan.. see my first reply "The log and the error code 0xC1037AE6 clearly suggest that there is a
problem with the ldf file itself." this is exactly what I wanted to point out but probably it was not paraphrased correctly... Good to hear that your problem is fixed by the ways.

Thanks

"Dan" <Dan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:55FBEE2A-198B-4B9A-B095-5D6EDD4872AE@xxxxxxxxxxxxxxxx
Man, it always seems to be the last thing you check...
So, after seriously eliminating a ton of other error messages and thinking I
was so close to the actual problem... I thought to myself, self, what about
the actual install code for Exchange? It's the one thing that hasn't been
replaced in all this... so, after finding a new CD all is working. The funny
thing is that the "corrupted" install code was on a file share so who'd have
thought that would be "bad"?
Absolutely unreal.. oh well, I suppose that just shows to always check the
simplest things first!
Thanks again for the reply!

"milind.naphade@xxxxxxxxxxx" wrote:

My apologies for reading your first post incorrectly. I mixed up two
different things within two different posts. also, don’t worry about that
F:\titanium thing in setup log it’s the temporarily created location...
there is nothing actual as F:\ (this is different than your physical drive
if you have a drive installed and has letter assigned as F:)


"Dan" <Dan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E11CD5DB-D39B-4A04-B5D4-19F0A0C13E4D@xxxxxxxxxxxxxxxx
> Thanks for the reply.
> So verbose mode of DCDiag was passed all the way through with no issue
> that
> I could find in the output.
> I'm not sure what you mean by me "trying to recover". This is a brand > new
> install. Nothing has ever been on this box. The schema has never been
> touched. It is a VM but I'm not copying another, this is a fresh build
> from
> CD).
> The LDIF.log file has this at the end when it errors:
> 224:
> CN=ms-Exch-Monitor-Services,CN=Schema,CN=Configuration,DC=upgrade,DC=pstntest,DC=com
> Entry DN:
> CN=ms-Exch-Monitor-Services,CN=Schema,CN=Configuration,DC=upgrade,DC=pstntest,DC=com
> changetype: add
> Attribute 0) adminDescription:ms-Exch-Monitor-Services
> Attribute 1) adminDisplayName:ms-Exch-Monitor-Services ms
> Attribute 2) attributeID:1.2.840.113556.1.2.160
> Attribute 3) attributeSyntax:2.5.5.8
> Attribute 4) isMemberOfPartialAttributeSet:FALSE
> Attribute 5) isSingleValued:TRUE
> Attribute 6) lDAPDisplayName:monitorServices
> Attribute 7) mapiId:32984
> Attribute 8) name:ms-Exch-Monitor-Services
> Attribute 9) oMSyntax:1
> Attribute 10)
> objectCategory:CN=Attribute-Schema,CN=Schema,CN=Configuration,DC=upgrade,DC=pstntest,DC=com
> Attribute 11) objectClass:attributeSchema
> Attribute 12) inDescription:ms-Exch-DXA-Append-ReqCN
>
> Add error on line 4009: No Such Attribute
> The server side error is "The parameter is incorrect."
> 223 entries modified successfully.
> An error has occurred in the program
>
>
> The setup process log has the following errors at the end:
>
> [14:01:52] ScRunLDIFScript
> (f:\titanium\admin\src\libs\exsetup\exmisc.cxx:1309)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:01:52] ScImportActiveDSSchemaChanges
> (f:\titanium\admin\src\libs\exsetup\exmisc.cxx:1408)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:01:52] CAtomSchema::ScAddDSObjects
> (f:\titanium\admin\src\udog\exsetdata\components\root\a_schema.cxx:254)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:01:52] Leaving CAtomSchema::ScAddDSObjects
> [14:01:52] CAtomSchema::ScAdd
> (f:\titanium\admin\src\udog\exsetdata\components\root\a_schema.cxx:150)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:01:52] Leaving CAtomSchema::ScAdd
> [14:01:52] mode = 'ForestPrep' (61965) CBaseAtom::ScSetup
> (f:\titanium\admin\src\udog\setupbase\basecomp\baseatom.cxx:842)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:10:34] >>>>>>>>>> Setup encountered a fatal error during Microsoft
> Exchange Forest Preparation of ForestPrep component task. -- > ID:62237 -- > CBaseComponent::ScSetup
> (f:\titanium\admin\src\udog\exsetdata\components\forprep\compforprep.cxx:513)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:10:34] Entering
> CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
> [14:10:34] Leaving
> CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
> [14:10:34] CCompForestPrep::ScSetup
> (f:\titanium\admin\src\udog\exsetdata\components\forprep\compforprep.cxx:613)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:10:34] Leaving CCompForestPrep::ScSetup
> [14:10:34] CComExchSetupComponent::Install
> (f:\titanium\admin\src\udog\bo\comboifaces.cxx:829)
> Error code 0XC1037AE6 (31462): Extending the schema in the
> Active
> Directory failed. Please consult the error log LDIF.ERR in your TEMP
> directory.
> [14:10:34] Entering ScQueueWatsonErrorReport
> [14:10:34] Leaving ScQueueWatsonErrorReport
> [14:10:34] Entering ScIsForestPrepped
> [14:10:34] Checking whether the forest is ForestPrepped
> [14:10:34] Looking for the Exchange organization container
> [14:10:34] Exchange organization container not found
> [14:10:34] === IGNORING PREVIOUS ERRORS === ScIsForestPrepped
> (f:\titanium\admin\src\libs\exsetup\dsmisc.cxx:1210)
> The operation has completed successfully.
> [14:10:34] This forest is not ForestPrepped
> [14:10:34] Leaving ScIsForestPrepped
> [14:10:34] Entering ScIsForestPrepped
> [14:10:34] Checking whether the forest is ForestPrepped
> [14:10:34] Looking for the Exchange organization container
> [14:10:34] Exchange organization container not found
> [14:10:34] === IGNORING PREVIOUS ERRORS === ScIsForestPrepped
> (f:\titanium\admin\src\libs\exsetup\dsmisc.cxx:1210)
> The operation has completed successfully.
> [14:10:34] This forest is not ForestPrepped
> [14:10:34] Leaving ScIsForestPrepped
> [14:10:34] Entering ScIsForestPrepped
> [14:10:34] Checking whether the forest is ForestPrepped
> [14:10:34] Looking for the Exchange organization container
> [14:10:34] Exchange organization container not found
> [14:10:34] === IGNORING PREVIOUS ERRORS === ScIsForestPrepped
> (f:\titanium\admin\src\libs\exsetup\dsmisc.cxx:1210)
> The operation has completed successfully.
> [14:10:34] This forest is not ForestPrepped
> [14:10:34] Leaving ScIsForestPrepped
> [14:10:34] Entering CCompRoot::ScPostSetup
> [14:10:34] Leaving CCompRoot::ScPostSetup
> [14:10:36] CComBOIFacesFactory::QueryInterface
> (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
> Error code 0X80004002 (16386): No interface.
>
>
> Any ideas? Any notion as to what all those references to F:\... are?
> That
> is not part of anything I'm using.
>
> Thanks again for your help.
>
> "milind.naphade@xxxxxxxxxxx" wrote:
>
>> The log and the error code 0xC1037AE6 clearly suggest that there is a
>> problem with the ldf file itself. can you please check your event >> logs
>> and
>> the setup progress log file as well? see what goes wrong when the >> setup
>> terminates with the following error message.
>>
>> Running dcdiag in verbose mode would not be a bad idea. as I >> understand
>> from
>> the description you must have your schema already prepared before you >> are
>> trying to recover. can you browse to the schema context and see if you
>> can
>> locate
>> CN=ms-Exch-Monitor-Services,CN=Schema,CN=Configuration,DC=ad,DC=domain,DC=com
>> entry in there?
>>
>> thanks,
>>
>> "Dan" <Dan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:CA1DC5FA-BD9A-4E53-BBA5-F92FD724D502@xxxxxxxxxxxxxxxx
>> > So I've tried a rebuild, different service packs and am still not >> > sure
>> > why
>> > this is happening. I have a single server windows 2003 domain with >> > all
>> > roles
>> > on the one DC. Nothing else has been joined to the domain. I'm
>> > attempting
>> > to install Exchange 2003 Enterprise on the single DC (win 2k3 std) >> > and
>> > not
>> > having any luck. When forestprep is run I get the same error each
>> > time:
>> >
>> > Setup failed while installing sub-component MS windows active >> > directory
>> > schema update with error code 0xC1037AE6 (please consult the
>> > installation
>> > logs for a detailed description).
>> >
>> > So in looking into the error I see it is usually a problem with >> > spaces
>> > in
>> > some environment variables which did not solve the problem.
>> >
>> > Here is an extract of the ldif.err file:
>> >
>> > Entry DN:
>> > CN=ms-Exch-Monitor-Services,CN=Schema,CN=Configuration,DC=ad,DC=domain,DC=com
>> > changetype: add
>> > Attribute 0) adminDescription:ms-Exch-Monitor-Services
>> > Attribute 1) adminDisplayName:ms-Exch-Monitor-Services ms
>> > Attribute 2) attributeID:1.2.840.113556.1.2.160
>> > Attribute 3) attributeSyntax:2.5.5.8
>> > Attribute 4) isMemberOfPartialAttributeSet:FALSE
>> > Attribute 5) isSingleValued:TRUE
>> > Attribute 6) lDAPDisplayName:monitorServices
>> > Attribute 7) mapiId:32984
>> > Attribute 8) name:ms-Exch-Monitor-Services
>> > Attribute 9) oMSyntax:1
>> > Attribute 10)
>> > objectCategory:CN=Attribute-Schema,CN=Schema,CN=Configuration,DC=ad,DC=domain,DC=com
>> > Attribute 11) objectClass:attributeSchema
>> > Attribute 12) inDescription:ms-Exch-DXA-Append-ReqCN
>> >
>> > Add error on line 4009: No Such Attribute
>> > The server side error is "The parameter is incorrect."
>> > An error has occurred in the program
>> >
>> > Can anyone help me here?
>> > I've tried completely redoing the box and I'm still getting the same
>> > problem.
>> >
>> > Thanks for any help!!!
>> >
>>
.

Relevant Pages

  • Re: Stumped
    ... The log and the error code 0xC1037AE6 clearly suggest that there is a problem with the ldf file itself. ... see what goes wrong when the setup terminates with the following error message. ... as I understand from the description you must have your schema already prepared before you are trying to recover. ... to install Exchange 2003 Enterprise on the single DC and not ...
    (microsoft.public.exchange.admin)
  • Re: Toshiba P-25 XP Media CE Critical Update KB838358 Install Problems (long)
    ... >I have attempted to install this Media Center Edition ... >information on this error code. ... and have only just begun my search on the Usenet. ... 0.406: KB838358 Setup encountered an error: Setup cannot continue because one ...
    (microsoft.public.windowsupdate)
  • Re: SBS 2003 New install
    ... Setup can't find the Schema Master or the ... Post and "ipconfig/all" from the server and install and run the tools. ... "Setup failed while installing sub-component Microsoft Windows Active ... Directory schema update with error code 0XC1037AE6." ...
    (microsoft.public.windows.server.sbs)
  • Re: Mailbox Role fails with "Access Denied" error
    ... copy to a folder on the root of a drive to get the setup to proceed. ... Did you prepare the AD with the exchange 2007 /preparead commands? ... When I try to install the Mailbox role on my new machine, ... Error code 0XC0070005: Access is denied. ...
    (microsoft.public.exchange.setup)
  • Re: Windows Media Player 11 error 80070005
    ... Enter %temp%. ... click on the WMP11 install package to have it run. ... Once the first WMP11 setup dialog comes up, ... Package install complete. ...
    (microsoft.public.windowsmedia.player)
Quantcast