Re: Eseutil exchange error -1019

Tech-Archive recommends: Speed Up your PC by fixing your registry

A -1019 error (JET_errPageNotInitialized) is reported when a page that is
expected to be in use is uninitialized or empty. If the page number field on
a page in use is 0x00000000, a -1019 error is reported instead of a -1018
error, even though the page might also fail its checksum test. Offline
defrag's will in most cases and most of the time remove these pages from the
database.

These are errors however they are not -1018;s which in that case you would
need to repair your database with "eseutil /p". Now I will agree that these
are can be caused by hardware (bad controller, disks, etc), however they are
repairable.

If you find a -1018 or -1019 error in your application log you really need
to know at least three things:

.. What was on the damaged page
.. What the likelihood of successful repair is
.. What caused the damage in the first place

-1018 and -1019 errors might occur at the command line when you start the
service, in the Application event log, or in the output of Exchange
utilities such as Eseutil. A -1018 error in the Application event log might
not be reported when you run a database integrity check with the Eseutil /G
command. In this situation, it is likely that the bad page is empty.


--
This posting is provided "AS IS" with no warranties, and confers no rights.
Dgoldman [MSFT]: http://blogs.msdn.com/dgoldman
Download OABInteg: http://code.msdn.com/oabinteg

"Andy David {MVP}" <adavid@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6niea41q4tlkvmc9gli5j120uckv6fddrm@xxxxxxxxxx
On Fri, 15 Aug 2008 07:42:00 -0700, Sam Wishka
<SamWishka@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:



"Sam Wishka" wrote:



"Oliver Moazzezi [MVP]" wrote:

Hi Sam,

Are you in a position to move mailboxes?

Oliver
Hi Oliver,

No i am runing a defragmation, because my mailbox Storage capacity is
full (16gb).

Thats not going to solve your 1019 errors.
Eseutil wont solve them either.

It may temporarily appear to fix it, but these type of errors are
usally hardware/fireware related and will return.

Since you dont have a good backup and cant get a good one, the last
thing you want to do at this point is run eseutil or any utils against
the store.

Bring up another mailbox server. move mailboxes and public folders.
Verify you have the latest drivers and firmware on the orginal server
and move everything back. ( Oh and run a backup on the swing server
after moving mailboxes).









thanks,
Sam




.

Relevant Pages

  • Re: priv1.edb and priv1.stm growing for no apparant reason
    ... Is there by chance any file system-based anti-virus software installed on ... They hardly contain any mailboxes. ... I did run an eseutil /mh and that doesn't ... LAst night this server also had problems with mounting it's mailbox ...
    (microsoft.public.exchange.admin)
  • Re: priv1.edb and priv1.stm growing for no apparant reason
    ... Is there by chance any file system-based anti-virus software installed on ... They hardly contain any mailboxes. ... I did run an eseutil /mh and that doesn't ... LAst night this server also had problems with mounting it's mailbox ...
    (microsoft.public.exchange.admin)
  • Re: Relocating storage to a Stdby server or IP replication for DR
    ... Right Click the combined group selection and choose Exchange ... Part 2- Associate replicated mailbox stores with new Exchange Server ... Using the RMC select all non-connected mailboxes using either the ... > ESEUTIL /g E:\Exchsrvr\MDBDATA\priv1.edb ...
    (microsoft.public.exchange.admin)
  • GAL is empty
    ... I have recently installed the first Exchange 2003 server ... Also on the server the Offline Address Book ... GAL is empty therefore no OAB will be created. ... correctly displays all mailboxes and DLs. ...
    (microsoft.public.exchange.admin)
  • GAL is empty
    ... I have recently installed the first Exchange 2003 server ... Also on the server the Offline Address Book ... GAL is empty therefore no OAB will be created. ... correctly displays all mailboxes and DLs. ...
    (microsoft.public.exchange.misc)