Re: HTTP Virtual Server Loses Settings

Sorry, I didn't make myself very clear. Below is an exampe config... and it
works fine with ActiveSync (both virtual servers) and via a web browser with
the SSL certificates for quite a while before the settings disappear. I've
replaced the domain names for obvious reasons.


Default Web Site:

PublicIPAddress1 Port 80 exchange.originaldomain.com
InternalIPAddress Port 80 exchange.originaldomain.com

PublicIPAddress1 SSL Port 443


Second Virtual Server:

PublicIPAddress2 Port 80 exchange.newdomain.com
InternalIPAddress Port 80 exchange.newdomain.com

PublicIPAddress2 SSL Port 443
InternalIPAddress SSL Port 443



Basically, it all works until all the settings in Second Virtual Server just
disappear/reset back to the default.


Thanks.













--
CSS


"Lee Derbyshire [MVP]" wrote:

"Chris Smith" <inraindreams@xxxxxxxxxxx> wrote in message
news:2B7BE476-26F0-4BA5-953D-BB8620B2DEC9@xxxxxxxxxxxxxxxx
I have a second virtual server setup via System Manager. I then
went in
through IIS Admin tool and did more advanced configuration such as
adding SSL
to a specific IP address, host header for a different IP address,
etc. so
that I can have two "http virtual servers" that use two different
SSL
certificates (we are in the process of migrating domains and we use
Treo
700wx's).

It works great for several hours... but then, for some reason, all
the SSL,
host header configuration, etc. for the second HTTP virtual server
disappear
and it stops listening on 443 at the specified IP address. It almost
seems
like it is being reset back to the default at random intervals by
Exchange
management.

Any ideas?

Thanks,

Chris


--
CSS

You mentioned host headers, but host headers don't work with SSL
(because the request is still encrypted at the stage that IIS is
trying to work out which site to send it to). Your Default Web Site
and the extra site must have different IP addresses and/or different
port numbers. It sounds like you are using port 443 for both, so your
Default Web Site can no longer use the 'All Unassigned' IP selection.
Pick one IP address for the DWS and another for the extra site.

Lee.

--
_______________________________________

Outlook Web Access For PDA , OWA For WAP
www.owapda.com
email a@t leederbyshire d.0.t c.0.m
_______________________________________



.

Relevant Pages

  • Re: Exch 2K3 OWA port 80 conflict with SUS
    ... How do I examine the IIS metabase and validate that port 80 is used by OWA ... and that the links are OK to the Exchange IS? ... FE - Default Web Site ... FE - Default Web Site - Anonomouse Auth and Integrated - Require SSL ...
    (microsoft.public.exchange.setup)
  • Re: HTTP Virtual Server Loses Settings
    ... Make the changes to the HTTP virtual server in Exchange System Manager. ... the SSL certificates for quite a while before the settings disappear. ... InternalIPAddress Port 80 exchange.originaldomain.com ... Your Default Web Site ...
    (microsoft.public.exchange.admin)
  • IIS + Network Load Balancing + Multiple SSL sites
    ... We have a 2 servers that are network load balanced ... Each web site we ... One of which uses the standard SSL port of ... for SSL. ...
    (microsoft.public.inetserver.iis.security)
  • Re: Exch 2K3 OWA port 80 conflict with SUS
    ... How do I examine the IIS metabase and validate that port 80 is used by OWA ... and that the links are OK to the Exchange IS? ... FE - Default Web Site ... FE - Default Web Site - Anonomouse Auth and Integrated - Require SSL ...
    (microsoft.public.exchange.setup)
  • Re: SSL SMTP config on Exchange2k and Outlook (2k&xp)
    ... I have had SSL ... > port 25 to handle incoming traffic. ... > this virtual server but still have an SSL cert associated with it. ... (SSL in this case is TLS). ...
    (microsoft.public.exchange2000.protocols)
Loading