Re: Event ID: 2114 Topology Discovery failed.

have you applied kb 898060 to your W2K3 SP1 Exchange servers and domain
controllers?


<deadbolt67@xxxxxxxxx> wrote in message
news:1165429649.328171.282610@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

John Fullbright [MVP] wrote:
8007077f=Error_no_sitename

What W2K3 Sp are you at?



<deadbolt67@xxxxxxxxx> wrote in message
news:1165373140.744313.253390@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Just notice in my post that the Process should have been EMSMTA.EXE

Any suggestions are greatly appreciated!

deadbolt67@xxxxxxxxx wrote:
Just started receiving this error in my Application log. This is
appearing on my BE server.

Event ID: 2114
Source: MSExchangeDSAccess
Description:
Process EMSMTS.EXE Topology Discovery failed, error 0x8007077f

Configuration:

1 Front End Exchange 2003 with SP1.
2 Back End Exchange 2003 with SP1.

I have checked AD Sites and Services and everything appears correctly
configured. In fact, after I up the logging on Exchange, I started
receiving Event ID: 2080 that lists the correct DCs and GCs in my
site.

In-site:
SRV001.mydomain.xxx CDG 7 7 1 0 1 1 7 1
SRV002.mydomain.xxx CDG 7 7 1 0 1 1 7 1

This configuration has been running for nearly a year without any
problems of this nature. Also, dcdiag, netstat, etc on my DCs report
no problems.

What am I missing; ideas?

Regards,
Michael


Thank you for the reply. I am currently at Service Pack 1.

Going through our logs, this started happening after a reboot last
weekend. Prior to that reboot, it had never occurred before.

The 2114 errors are appearing in the log every 30 minutes. Also, just
today, I am seeing 2115 LDAP errors sourced by MSExchangeDSAccess.

"Process INETINFO.EXE (PID=2044). DSAccess needs to close a connection
to the Domain Controller SRV001.mydomain.xxx due to error 0x80040920"



.

Relevant Pages

  • Re: Event ID: 2114 Topology Discovery failed.
    ... Front End Exchange 2003 with SP1. ... 2080 that lists the correct DCs and GCs in my site. ... Going through our logs, this started happening after a reboot last ... Prior to that reboot, ...
    (microsoft.public.exchange.admin)
  • Re: Event ID: 2114 Topology Discovery failed.
    ... Front End Exchange 2003 with SP1. ... 2080 that lists the correct DCs and GCs in my ... Going through our logs, this started happening after a reboot last ... Prior to that reboot, ...
    (microsoft.public.exchange.admin)
  • Re: Exchange 2007 - multiple RAID controllers
    ... For resiliency keep databases and logs on different physical volumes. ... If you're planning to install Exchange 2007 and don't have any special needs regarding high-availability I would say that you can go ahead with just one controller. ... Many people also recommended using different RAID controllers for each. ...
    (microsoft.public.exchange.setup)
  • GAL in Exchange 2007
    ... The 450 contacts existed in an Exchange 2003 ... showed up correctly in ADUC on both domain controllers and the E2K7 ... When I selected the existing user option, ... Is there a default GAL update period? ...
    (microsoft.public.exchange.admin)
  • Re: Exchange Server 2007
    ... Controllers in the children domains (all single DC 'environments' running ... Cost is often a huge factor....and, ... MVP - Exchange ... in order to install Exchange Server 2007 all Domain ...
    (microsoft.public.exchange.admin)