Re: Exhange upgrade 2003

Well, if you have firewall, have the firewall point all incoming SMTP
traffic to the new server's IP instead of the old Exchange 2000...

If you want to use diffrent IP on the Internet, well, then you need to
change the MX record...

--
--

"Paul" <Paul@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:84B55621-730D-481E-86C6-0106113F5A51@xxxxxxxxxxxxxxxx
Thx Andy, that worked for the outbound.. how about the stuff coming in?

"Andy David - MVP" wrote:

On Wed, 4 Oct 2006 07:06:03 -0700, Paul
<Paul@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Hello,

I have a exchange 2000 and exchange 2003 box and in the process of
migrating. I have moved about 20 mailboxes over to new server and
wanted to
know how i get the smtp on the exchange 2003 to start delivering
external
messages. I have made the proper changes on the firewall as the same as
the
exchange 2003 box



Using a SMTP connector? If so, change the bridgehead in the connector
properties to the new server.



.

Relevant Pages

  • RE: strange email errors
    ... you to check the relay configuration on the SBS server. ... please restart the SMTP virtue server and Exchange ... Please also refer to the following steps to create a new SMTP Connector to ...
    (microsoft.public.windows.server.sbs)
  • Re: Change to SmartHost Failed
    ... I'm assuming we're talking about Exchange 2003 since you didn't say. ... Do not configure a smart host in your back-end SMTP ... You created an SMTP Connector and specified the ... two front-end servers as bridgehead servers, so that dictates that all mail ...
    (microsoft.public.exchange.admin)
  • Re: Migrating IMC to Exchange 2000 via SMTP
    ... you can increase the cost of SMTP address space *. ... you can make the cost on SMTP Connector in Exchange 2003 ... and redirect the smtp traffic to the old exch 5.5 server. ...
    (microsoft.public.exchange.setup)
  • RE: 550 5.7.1 Unable to relay intermittent issues.
    ... As the NDR 5.7.1 occurs randomly, it may be related to the DNS resolve ... Connectors, point to New, and then click SMTP Connector. ... Restart SMTP service and Microsoft Exchange Routing Engining service. ...
    (microsoft.public.exchange2000.admin)
  • Special User Failed To Send Email To Outside
    ... I am not an expert in Exchange 2003. ... This is an SMTP protocol error log for virtual server ID 1, ... We tried to restart the SMTP Connector in the Exchange Server and it ...
    (microsoft.public.exchange.connectivity)
Loading