Re: mailbox disabled

In news:3BB0EDEB-5611-4D69-AA76-1A93742CBE78@xxxxxxxxxxxxx,
Doug <Doug@xxxxxxxxxxxxxxxxxxxxxxxxx> typed:
Sorry, I see what you mean - my examples of firstname@xxxxxxxxxx on
the recipient side. My mistake with the examples.

To try and clarify (my mistake, not yours), their server only accepts
email for one domain - domain.net. The reciepient policy reflects
this. They are not trying to have, and do not want, any other domains
served and their are no other domains involved.

OK - that helps, thanks.


When the user accounts on the server were initially created the client
wanted first initial, last name. So the email addresses were
automatically the same. NONE of these would work and anyone sending
e-mail from outside the network would receive the "mailbox has been
disabled" NDR. Inside the network, life was good.

That is funky - it should have worked. You might want to post the actual
domain name in here.



As an example - if dallen was the login name then dallen@xxxxxxxxxx
would be the default e-mail address. When the e-mail didn't work
from the outside to those addresses, we also added additional SMTP
addresses in the form of doug@xxxxxxxxxxx For an unknown (to us)
reason, this worked with both of the 2 original accounts. They are
still successfully using the additional addresses and mail is still
being rejected at the 1stinitiallastname addresses stating that the
mailbox is disabled even though both doug and dallen type addresses
use the same mailbox. I have even tried deleting the original
addresses and then re-adding them - same result.

After a couple of weeks of trying to resolve through the newsgroups
and directly with Microsoft, we were told to re-install. Since the
added addresses were working, and there were no other apparent
problems, the client did not want to do this.

Don't blame them. I don't think you need to reinstall, anyway.

You're using SBS, so that may play a role here. Are you using the SBS POP
connector?


That is how things have been left for several months until other
employees have been recently given network and e-mail accounts. The
customer has been trying to manage the network and they created the
accounts. We weren't contacted again until it became obvious that
the new users weren't getting e-mail and anyone sending from the
outside was receiving an NDR.

The accounts appear to be correct but, with the new accounts, even
adding the additional SMTP address doesn't work. I can see nothing
glaringly wrong with the server, the user accounts, mailboxes or
Exchange. We have over 50 servers setup identical to this one with
no probelms. We have been working with Exchange servers since 5.5
and have never seen this.

Thanks again,

Doug

"Lanwench [MVP - Exchange]" wrote:

In news:6761E427-BE46-401C-8D8E-B79F562AAE54@xxxxxxxxxxxxx,
Doug <Doug@xxxxxxxxxxxxxxxxxxxxxxxxx> typed:
Not a silly question at all-

This error message was from my server(domain.com) stating that it
had been told the mailbox was disabled on the recipient
server(domain.net). Hope this clarifies my original post.

Actually, that doesn't really clarify it, alas. I wasn't referring to
mydomain.com - just that you mention domain.com & domain.net in the
*recipient* bits here. Let's start over.

What is in the recipient policy in Exchange on the SBS box in
questoin? And, what e-mail addresses are defined in this recipient's
mailbox properties?




"Lanwench [MVP - Exchange]" wrote:

In news:5C8C8A7B-89A3-4C25-826B-055125AFF4B2@xxxxxxxxxxxxx,
Doug <Doug@xxxxxxxxxxxxxxxxxxxxxxxxx> typed:
Windows 2003 Small Business Server Service Pack 1
Exchange 2003 Service Pack 2
All updates, patches, etc are up-to-date.

When sending email within the network, everything is fine. When
sending from the outside to several of the accounts inside (not
all) the following message is received-

Your message did not reach some or all of the intended recipients.
Subject: test
Sent: 10/4/2006 8:29 AM
The following recipient(s) cannot be reached:
mbennington@xxxxxxxxxx on 10/4/2006 8:30 AM
The message reached the recipient's e-mail system, but
delivery was refused. Attempt to resend the message. If it still
fails, contact your system administrator.
<mydomain.com #5.2.1 smtp;550 5.2.1
<mbennington@xxxxxxxxxx>... Mailbox disabled for this recipient>

User and e-mail accounts appear to be setup correctly - we have
over 50 servers configured as this one with no problems. The
mailboxes are not disabled - internal e-mail works fine. There
are currently only 4 users on this box. Two accounts are working
and two are exibiting this behaviour. The original 2 that are now
working had this identical problem when first setup but we
changed the email addresses from the default
firstinitiallastname@xxxxxxxxxx to firstname@xxxxxxxxxx and they
started working correctly although you will still receive the
error if you try to send to the original address (which still
exists on their user account). We tried this with these two
additional accounts and it didn't help.

I originally posted to the newsgroups with the first two users on
this system about 6 month ago (not sure which group - SBS or
Exchange) and after several replies it we could not find the cause
and it was recommended that the server be re-installed. The
customer did not want to do that and since the alternate addresses
were working nothing was done. Now that the company is growing
and additional people are being added, we need a resolution.

Any ideas?

Thanks,
Doug

Silly question, maybe, but the example address in the NDR is
somebody@xxxxxxxxxx - and in your description below that, you've
got somebody@xxxxxxxxxxx Do you use both domain.com and
domain.net, and, if so, are both of those domains set up in your
recipient policy, with the appropriate addresses set on each
user's mailbox?



.

Relevant Pages

  • The Esc Character.
    ... I then tried Mac help for the Mac email client that I use with effectivity to find the article I copy and paste below. ... where I selected all of the messages and then clicked on Remove From Server. ... My mailbox is over its quota ... For .Mac or IMAP accounts, click the Size header to find the largest mail folders on your server. ...
    (comp.sys.mac.misc)
  • Re: mailbox disabled
    ... POP3 provider was still being used as a backup. ... it was a server problem. ... just from the senders' servers stating that the mailbox was ... I stepped back today to see what the accounts that were working ...
    (microsoft.public.exchange.admin)
  • Re: mailbox disabled
    ... Your POP3 connector question made me realize that the ... we got tunnel vision thinking it was a server problem. ... that the mailbox was disabled. ... I stepped back today to see what the accounts that were working seemed to ...
    (microsoft.public.exchange.admin)
  • Re: How to recover from crashed server?
    ... For each of the accounts, remove its Exchange attributes. ... mailbox on the new server. ... recovery storage group and into the new mailbox. ...
    (microsoft.public.exchange.admin)
  • Re: mailbox disabled
    ... This error message was from my serverstating that it had been ... told the mailbox was disabled on the recipient server. ... User and e-mail accounts appear to be setup correctly - we have over ...
    (microsoft.public.exchange.admin)