Re: Problem sending E-mail to 1 server

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

No it doesn't we are on the 64.x.x.x subnet and the server in question is on
the 66.x.x.x subnet.

"Don Wallace" <DonWallace@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2FE47C7F-593C-4A47-828A-B9672D4214A0@xxxxxxxxxxxxxxxx
> Check the IP address for MX.Frontier.Net and see if it conflicts with your
> internal IP addressing.
>
> Regards
>
> Don Wallace
>
> "Motley Crue" wrote:
>
>> I have currently having a problem send e-mail to 1 e-mail server. The
>> server
>> in question is frontiernet.net. I do not have any other problems with any
>> other mailservers. What appears to be happening is that when our server
>> tries to send e-mail to their server it will make the initial connection
>> but
>> then times out after 2 minutes of trying. One thing that the people at
>> frontiernet.net had me do was try to telnet to mx.frontiernet.net on port
>> 25. I could not do that from my mailserver or any other server on my LAN.
>> If
>> I did it directly from our firewall it would work. I can telnet to port
>> 25
>> on other mailservers from our mailserver so I know that it is passing
>> smtp
>> to our mailsever just fine. What I cannot figure out is what is unique
>> about
>> this one particular mailserver that doesn't allow it to communicate
>> through
>> our firewall. Would it be possible for someone to try this and see what
>> the
>> heck the server is trying to do? I would greatly appreciate it if someone
>> could help with this.
>>
>> The mailserver in question is "mx.frontiernet.net"
>>
>>
>>


.

Relevant Pages

  • Re: What can make DNS lookups slow? [semi-solved]
    ... You have a ADSL connection to the Internet. ... your firewall as eth0. ... And you have a connection to your server - that connection is known to ... this subnet. ...
    (Debian-User)
  • Re: Cant browse across subnets
    ... turning on the firewall logging on a workstation to discover where the ... server or a server. ... what to do to allow a different subnet access to file and print. ... software, CALs, a couple of workstations so I'm ...
    (microsoft.public.windows.server.sbs)
  • RE: Splitting Network / Domain
    ... With the Firewall and router piece you need to decide how this is going to ... VLANs for each subnet and set up interVLAN routing between the VLANs. ... do it in groups using the old server as the SMTP head and just have it to ...
    (microsoft.public.windows.server.active_directory)
  • Re: Single 2003 Server with DHCP, DNS and ISA 2006
    ... the public side of the firewall. ... Our DNS Server is just for the internal clients. ... Not too surprising with the above subnet problems. ... To the Internet. ...
    (microsoft.public.windows.server.general)
  • Re: 4 stupid WINDOWS FIREWALL questions
    ... The Windows Firewall is a good firewall if your needs are only to only block ... If your server is not the destination IP then it should not even process the ... computers on your network are determined by the subnet mask. ...
    (microsoft.public.windowsxp.security_admin)